Swingblade SAWMILL Build Ep.3 - Steel Frame Fabrication
This time I'm building a circular swingblade sawmill from scratch. The function of the mill is in its name - the blade swings 90 degrees making it possible to cut both ways while moving the carriage up and down the log resulting in dimensional lumber in one pass. I built a chainsaw mill ten years ago and milled lumber that I used for my cabin / sauna house project. Then I built a bandsaw mill five years ago and used the cut lumber to build a partition in my barn I currently call my workshop. Both of them worked great, bandsaw mill was faster than chainsaw mill for sure. But I think I can make an even faster mill and swingblade sawmill in my opinion is just what I'm looking for. There are different types of swingblade sawmills, one type utilizes a railway system where the saw carriage rides on rails so both rails are in the way when loading the logs. I want to build a beam-type mill where the saw carriage is suspended on a beam over the log that sits on a couple of wedges so it doesn't roll off while cutting. There will be no need to clamp the log down. Cut depth and width adjustments are all going to be made on the sawmill beam end frames. And to top it off - it will basically be a portable sawmill due to its build properties but I think it's only going to sit in my yard regardless of the portability.
In this video I'm fabricating the beam end plates and both vertical and horizontal sliders.
This sawmill build is based on www.turbosawmill.com "Manual Mill" design and it is patent pending.
My other videos: https://www.youtube.com/DonnDIY/videos
Support me on: https://www.patreon.com/DonnDIY Follow me on: https://www.instagram.com/DonnDIY
#donndiy #homemade #sawmill
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
Видео Swingblade SAWMILL Build Ep.3 - Steel Frame Fabrication канала Donn DIY
In this video I'm fabricating the beam end plates and both vertical and horizontal sliders.
This sawmill build is based on www.turbosawmill.com "Manual Mill" design and it is patent pending.
My other videos: https://www.youtube.com/DonnDIY/videos
Support me on: https://www.patreon.com/DonnDIY Follow me on: https://www.instagram.com/DonnDIY
#donndiy #homemade #sawmill
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
Видео Swingblade SAWMILL Build Ep.3 - Steel Frame Fabrication канала Donn DIY
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Hydraulic Crane Install On Homemade 4x4 Timber Trailer - FM50TSwingblade SAWMILL Build Ep.9 - Lumber Sizing, Belt Guard, DismantlingSwingblade SAWMILL Build Ep.8 - Parallel Lift, Board Size AdjustmentSwingblade SAWMILL Build Ep.5 - Hard Stops, Motor Mount, Lift CylinderFully Rebuilt - 8x8 Amphibious Vehicle Argo REBUILD Ep.10Wabeco CNC mill making PE parts for 8x8 amphibious ARGO #donndiy #8x8 #trackedvehicleBrake Differential Steering etc. - 8x8 Amphibious Vehicle Argo REBUILD Ep.8Sprocket TIG Welding & Assembly - 8x8 Amphibious Vehicle Argo REBUILD Ep.7ASSEMBLY - 8x8 Amphibious Vehicle Argo REBUILD Ep.62 YEARS Timelapse - House is Built in 37 MINUTESEngine Maintenance - 8x8 Amphibious Vehicle Argo REBUILD Ep.5Gearbox Assembly - 8x8 Amphibious Vehicle Argo REBUILD Ep.4Gearbox Repair - 8x8 Amphibious Vehicle Argo REBUILD Ep.3Frame Repair Welding - 8x8 Amphibious Vehicle Argo REBUILD Ep.2Complete Teardown - 8x8 Amphibious Vehicle Argo REBUILD Ep.1Swingblade SAWMILL Build Ep.4 - Frame Sliders & LockersSwingblade SAWMILL Build Ep.2 - Saw Carriage FabricationSwingblade SAWMILL Build Ep.1 - Blade Adapter Machining & Swing Frame Fabrication🔥Making chips (not edible) 🤣 #shortsLathe work #shorts