Fujitsu DIY Mini Split Install (part 4) - Flare Connections

► HOW TO INSTALL A DUCTLESS MINI-SPLIT (R410A Flare Connections)
► https://www.remodelingcalculator.org/diy-ductless-mini-split-installation/
► Don't want to deal with DIY Install and buy all the tools? Get MrCOOL DIY: https://amzn.to/3cJDxlT

This video demonstrates Ductless Heat Pump Installation - how to flare copper line set for R410A refrigerant, with a Eccentric Flare Tool (https://amzn.to/3kWFOwI), including preparation, deburring and flaring steps.

Very important - PUT ON YOUR FLARE NUT before you start flaring.

► Eccentric Flare tools:

1) MasterCool (better): https://amzn.to/3kWFOwI
2) No name brand that works (good): https://amzn.to/3kVlsUG
3) Best, but expensive flare tool: https://amzn.to/33ijqs0

Deburring tool: https://amzn.to/3mZO9BI

DO NOT USE "STICK" Deburring Tool

► Other tools needed for Mini Split Install:

► ► ► Gauge set: YOU NEED GAUGES for R410A refrigerant. Most cheap gauge sets are for R134A (car AC) and will not work for Mini Split. You need HVAC gauges!

1) Yellow Jacket Manifold gauge + hoses (R410A / R22): https://amzn.to/3cX25YR
2) Cheaper MasterCool Gauge Set + Hoses: https://amzn.to/3jjJicj

3) RobinAir 5CFM vacuum pump (Good): https://amzn.to/33gS4lH

4) All vacuum pumps: https://amzn.to/33jevXD

5) CPS Vacuum gauge (Very Good): https://amzn.to/2Sg98SS

6) Flare Torque Wrench (YJ - manual): https://amzn.to/3jhnsGA

7) Torque Wrench (YJ digital adjustable): https://amzn.to/3kZNNJC

8) Valve Core removal tool - 1/4" - https://amzn.to/36n8lYA

9) Valve Core removal tool - 5/16" - https://amzn.to/3ijV0CC

You can get away with just Vacuum Pump & Manifold Gauge, but it is highly recommended to do a pressure test with Nitrogen, and to use all tools listed above, for best results!

Видео Fujitsu DIY Mini Split Install (part 4) - Flare Connections канала Remodel Calculator