F5 VLAN & Link Aggregation Group (LAG) || VLAN & SelfIP Configuration | f5 VLAN & LACP Configure ||

Step 1: Configure LACP (Link Aggregation)
Log in to the F5 BIG-IP Configuration utility.
Navigate to Network - Trunks and click Create.
Provide a name for the trunk and select the LACP protocol.
Add the desired interfaces to the trunk.
Configure any additional settings, such as LACP mode (active/passive) and load balancing method.
Click Finished to save the configuration.
Step 2: Create a VLAN
Go to Network - VLANs and click Create.
Provide a name for the VLAN and associate it with the previously created trunk.
Assign a tag ID if the VLAN is tagged, or leave it untagged for default VLANs.
Add self IPs as needed for the VLAN.
Click Finished to save.
Step 3: Assign VLANs to Traffic Groups
Navigate to Traffic Groups under the network settings.
Assign the VLANs to the desired traffic group for active/passive or active/active failover setups.
Step 4: Verify the Configuration
Check the LACP status under Network - Trunks to ensure all interfaces are active.
Verify VLAN connectivity using tools like ping or traceroute from the F5 system.

Please like and share this video with your friends and family. Also, Don't forget to subscribe to our channel for more videos.

কোন হেল্প লাগলেঃhttps://www.facebook.com/dailysupport.net
E-Mail: alsafiuladiat@gmail.com

Видео F5 VLAN & Link Aggregation Group (LAG) || VLAN & SelfIP Configuration | f5 VLAN & LACP Configure || канала Daily Support