A 5,7mm fiber cable installed by fiberblowing
Cable Blowing, Push & Pull installation and Cable Jetting are just some of the terms being used about getting cables into ducts and pipes using compressed air. Primarily used for fiber cable installation.
To get the best performance, there are several factors to consider. Cable stifness for instance, also, the duct's ability to hold air pressures of up to 10-12 bar (+145 psi) without leaks calls for quality duct and pipes.
The connectors and the assembling are of high importance. The connectors must be easy to mount and dismount.
Above matters have to be mixed with the right choice of fiber blowing machine.
This video channel is dedicated to show and demonstrate work methods and best practices.
gm@gm-plast.dk
www.gm-plast.com
Видео A 5,7mm fiber cable installed by fiberblowing канала GM Plast A/S
To get the best performance, there are several factors to consider. Cable stifness for instance, also, the duct's ability to hold air pressures of up to 10-12 bar (+145 psi) without leaks calls for quality duct and pipes.
The connectors and the assembling are of high importance. The connectors must be easy to mount and dismount.
Above matters have to be mixed with the right choice of fiber blowing machine.
This video channel is dedicated to show and demonstrate work methods and best practices.
gm@gm-plast.dk
www.gm-plast.com
Видео A 5,7mm fiber cable installed by fiberblowing канала GM Plast A/S
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Ducts and pipes from GM Plast. The FTTH expert2020 GM Plast A/S: Open throughout the summerHow to: underpass railtracks with ducts meant for fiberinstallationAnother FTTH connection based on GM productsTechnology makes more resourceful, also in FTTH roll outSardinia 2012, Progetto di infrastrutturazione a banda ultra larga in territorio regionaleYou never know what’s going to hit your cable…Redundant fiber optic ring for datacenterGM Plast ANGAcom 2019. Launch of the FLATTER!. Microducts, tools and much much moreGM Plast at ANGAcom 2019. Come and see us. Let us reveal all the secrets...Traffic signal control using microduct from GM Plast & micro trenching, PreviewMicro trenching a 10 X Ø20/16 GM Plast flatliner into a highway in rural areaRailvac is a vacuum based suction machine for surgical trenchmakingFiberinstallation in microductPlowing FTTH in rural areas, teaser.ANGACOM 2017: GM Plast A/S, Come and visit us! Hall 7 stand E40Glatte Multirohre auf ganzer Länge. Der neue Re Flatter von FiberpowertechEvery country, every region, every little spot sees contracting. Often with products from GM PlastStraight and fast, or serpentine and slow? Road phraseology translated into fiber blowingFTTH the smart way!FOR SALE: Ditch Witch RT55 micro trenching machine