BMW E30 Heater/Air Con Unit Restoration
Get Surfshark VPN at https://Surfshark.deals/restoreit - Enter promo code RESTOREIT for 83% off and 1 extra month for free!
In this episode, I restore the heater/air con unit from the E30 325i Sport. This is something I've been putting off because of how little I knew about it. I didn't know if it was going to easily dismantle, or if it was even possible. Some things aren't meant to be taken apart once they're made, but it turned out this was not one of those things. I managed to completely dismantle every single part and see to it that they went back in looking brand new.
This unit worked as it should when it was in the car. No leaks, no blower issues, and good heat. The only thing is, over the time it's been out I've lost a few pieces, including the correct resistor that sits just under the motor. I have that on order along with a large list of parts that either went missing during this restoration or before. Obviously, due to the lockdown, parts are taking a very long time to arrive, I wanted to get an episode out so I'll deal with those small parts later and update you on my Instagram. Links the bottom of this description.
Most of the tank was in great condition and didn't need touching. But as I was already painting the edges I thought a few more coats of paint wouldn't hurt.
Thanks for watching! Subscribe with the bell on to see this car back to the factory condition.
#restoration #BMWE30 #carproject
Thanks to FCP Euro for supplying parts for this restoration and supporting the channel. Get a lifetime guarantee on all parts here - https://hubs.ly/H0kPPZW0
Get a Shop Manual for Your Car: http://shrsl.com/1rdef
(Available for Most Makes and Models)
#Engine #BMWE30 #Restoration
Tools & equipment used:
Rohr 250Mi-11 Welder USE CODE 'RESTOREIT' for 5% off - https://unionmart.co.uk/
Quartz Lacquer - https://goo.gl/8PTVKM
Base Coat Paint - https://goo.gl/mWhufG
Rust Remover - https://goo.gl/13gopW
Rohr 250 Welder - https://bit.ly/33mkOGP
U-Pol Weld Through Primer #2 - https://bit.ly/2qL38ak
Fast Mover 1kW Infrared Paint Dryer, Stand, Timer - https://bit.ly/2WYR9jJ
Workbenches - https://arborgardensolutions.co.uk
Moldex Full Face Mask - https://goo.gl/NNYGrv
FGL 5 Spray gun - https://goo.gl/Acg5rd
A.N.I. R150-T Mini Spray gun - https://goo.gl/cHTJS2
Colad Washable Overalls - https://goo.gl/3Css9E
Colad Mixing Cups - https://goo.gl/8DYmE8
Colad TurboMix Sticks - https://goo.gl/cYZfks
Colad Synthetic Paint Strainers - https://goo.gl/H79ZgL
Steel wire bits - http://geni.us/keyaD
Blasting Cabinet - https://bit.ly/2GxvKJ7
Blasting pot - https://bit.ly/32TMnrU
Cordless Ratchet - https://bit.ly/30YNlkG
Parts Wahser - https://bit.ly/2K5G9wA
Rotary Tool - http://geni.us/HGed
Concentrate Degreaser - http://geni.us/yUn9
Mannesmann Socket Set - http://geni.us/HCDZ
Time Stamps:
00:00 – Opening shots
00:30 – How the unit works
01:00 – Dismantling
03:50 – SurfSharkVPN
04:53 – Dismantelling continued
15:29 – All of the parts laid out
16:08 – Washing 30 years of dirt off
16:23 – Removing the old vent foam
17:18 – Cleaning the bottom tray
17:36 – Cleaning the heater core
17:50 – Dismantelling the motor cover section
18:32 – Cleaning the motor
18:43 – Painting the plastic parts
19:02 – Restoring two damaged ABS plastic parts with a 3d pen
21:43 – Plastic parts before and after painting
22:02 – Restoring the radiator
22:28 – Restoring the heater core
23:05 – Adding new foam to the vents
24:43 – Restoring the wiring loom
25:08 – Restoring the pipes and cables
25:47 – Drilling out the rivets
26:24 – Shot blasting the small metal parts
26:51 – Polishing the small metal parts
27:04 – Zinc plating the small metal parts
27:30 – Removing two vents I had forgotten about
27:46 – Adding the last of the new foam
27:59 – Painting the small red connector
28:20 – Replacing the gaskets with new genuine BMW ones
28:42 – Adding new foam to the radiators
29:54 – All of the restored parts laid out
30:37 – Reassembly
39:48 – Comparrasion shot and final shots
40:16 – Thanks for watching
Follow me on Social media to keep up to date with videos and behind the scenes.
My Patreon Page:
https://www.patreon.com/RestoreIt
My Twitter Page:
https://twitter.com/Restore__It
My Facebook Page:
https://www.facebook.com/RestoreItCha...
My Instagram Page:
@RestoreItChannel
PayPal Donations:
Restoreitchannel@gmail.com
Discord
I now also have a discord server if you want to chill with like-minded people and maybe learn something new.
https://discord.gg/vNmCBk9
Видео BMW E30 Heater/Air Con Unit Restoration канала Restore It
In this episode, I restore the heater/air con unit from the E30 325i Sport. This is something I've been putting off because of how little I knew about it. I didn't know if it was going to easily dismantle, or if it was even possible. Some things aren't meant to be taken apart once they're made, but it turned out this was not one of those things. I managed to completely dismantle every single part and see to it that they went back in looking brand new.
This unit worked as it should when it was in the car. No leaks, no blower issues, and good heat. The only thing is, over the time it's been out I've lost a few pieces, including the correct resistor that sits just under the motor. I have that on order along with a large list of parts that either went missing during this restoration or before. Obviously, due to the lockdown, parts are taking a very long time to arrive, I wanted to get an episode out so I'll deal with those small parts later and update you on my Instagram. Links the bottom of this description.
Most of the tank was in great condition and didn't need touching. But as I was already painting the edges I thought a few more coats of paint wouldn't hurt.
Thanks for watching! Subscribe with the bell on to see this car back to the factory condition.
#restoration #BMWE30 #carproject
Thanks to FCP Euro for supplying parts for this restoration and supporting the channel. Get a lifetime guarantee on all parts here - https://hubs.ly/H0kPPZW0
Get a Shop Manual for Your Car: http://shrsl.com/1rdef
(Available for Most Makes and Models)
#Engine #BMWE30 #Restoration
Tools & equipment used:
Rohr 250Mi-11 Welder USE CODE 'RESTOREIT' for 5% off - https://unionmart.co.uk/
Quartz Lacquer - https://goo.gl/8PTVKM
Base Coat Paint - https://goo.gl/mWhufG
Rust Remover - https://goo.gl/13gopW
Rohr 250 Welder - https://bit.ly/33mkOGP
U-Pol Weld Through Primer #2 - https://bit.ly/2qL38ak
Fast Mover 1kW Infrared Paint Dryer, Stand, Timer - https://bit.ly/2WYR9jJ
Workbenches - https://arborgardensolutions.co.uk
Moldex Full Face Mask - https://goo.gl/NNYGrv
FGL 5 Spray gun - https://goo.gl/Acg5rd
A.N.I. R150-T Mini Spray gun - https://goo.gl/cHTJS2
Colad Washable Overalls - https://goo.gl/3Css9E
Colad Mixing Cups - https://goo.gl/8DYmE8
Colad TurboMix Sticks - https://goo.gl/cYZfks
Colad Synthetic Paint Strainers - https://goo.gl/H79ZgL
Steel wire bits - http://geni.us/keyaD
Blasting Cabinet - https://bit.ly/2GxvKJ7
Blasting pot - https://bit.ly/32TMnrU
Cordless Ratchet - https://bit.ly/30YNlkG
Parts Wahser - https://bit.ly/2K5G9wA
Rotary Tool - http://geni.us/HGed
Concentrate Degreaser - http://geni.us/yUn9
Mannesmann Socket Set - http://geni.us/HCDZ
Time Stamps:
00:00 – Opening shots
00:30 – How the unit works
01:00 – Dismantling
03:50 – SurfSharkVPN
04:53 – Dismantelling continued
15:29 – All of the parts laid out
16:08 – Washing 30 years of dirt off
16:23 – Removing the old vent foam
17:18 – Cleaning the bottom tray
17:36 – Cleaning the heater core
17:50 – Dismantelling the motor cover section
18:32 – Cleaning the motor
18:43 – Painting the plastic parts
19:02 – Restoring two damaged ABS plastic parts with a 3d pen
21:43 – Plastic parts before and after painting
22:02 – Restoring the radiator
22:28 – Restoring the heater core
23:05 – Adding new foam to the vents
24:43 – Restoring the wiring loom
25:08 – Restoring the pipes and cables
25:47 – Drilling out the rivets
26:24 – Shot blasting the small metal parts
26:51 – Polishing the small metal parts
27:04 – Zinc plating the small metal parts
27:30 – Removing two vents I had forgotten about
27:46 – Adding the last of the new foam
27:59 – Painting the small red connector
28:20 – Replacing the gaskets with new genuine BMW ones
28:42 – Adding new foam to the radiators
29:54 – All of the restored parts laid out
30:37 – Reassembly
39:48 – Comparrasion shot and final shots
40:16 – Thanks for watching
Follow me on Social media to keep up to date with videos and behind the scenes.
My Patreon Page:
https://www.patreon.com/RestoreIt
My Twitter Page:
https://twitter.com/Restore__It
My Facebook Page:
https://www.facebook.com/RestoreItCha...
My Instagram Page:
@RestoreItChannel
PayPal Donations:
Restoreitchannel@gmail.com
Discord
I now also have a discord server if you want to chill with like-minded people and maybe learn something new.
https://discord.gg/vNmCBk9
Видео BMW E30 Heater/Air Con Unit Restoration канала Restore It
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
BMW E30 325i Sport M Tech 1 Front Bumper RestorationBMW E30 M20B25 Engine Rebuild Restoration - | Part 9 | Putting It Back Together AgainBMW E30 Gas Tank RestorationBMW E30 M40B16 Engine Restoration - Rebuild Time-Lapse | Part 1BMW E30 Limited Slip Differential RestorationE30 Fix 9 | Steering Wheel, Dashboard RemovalBMW E30 M20B25 Engine Rebuild Restoration - The Machine Shop | Part 8BMW E30 HVAC Panel AC Switch Mount Repair + HVAC Panel Removal TutorialBMW E30 M3 Front and Rear Subframe [Restoration]1986 BMW E30 Pedal Box - [Restoration]BMW E30 Dashboard [Restoration]BMW E30 Brake Booster & Master cylinder Restoration | BMW E30 325i Sport Project S1 E3BMW E30 - Removing dashboard trim and center conBMW E30 Headlight Restoration | BMW E30 325i Sport Restoration E6 S1BMW E30 Starter Motor RESTORATION | BMW E30 325i Sport Restoration E7 S1BMW E30 M40 Engine Restoration - Rebuild Time-Lapse | Part 4BMW E30 Output Shaft - Full Restoration | BMW E30 325i Sport Restoration S2 E4BMW E30 325i - Rusty Rear End Restoration - Opening A Can Of WormsBMW E30 M3 Restoration | Continuing The RebuildHeavily Curbed BMW E30 BBS Wheels - Full Restoration | BMW E30 325i Sport Restoration S2 E5