DCC++ Controller with a very high amperage H-Bridge
The H-Bridge shown here is advertised to deliver up to 43 amps. While I don't think too many of us need that kind of power on a model railroad the unit I tested remained quite cool up to 5 amps. I am sure that it would have easily delivered 10 or more amps.
For more information see:
http://trainelectronics.com/DCC_Arduino/DCC++/
Видео DCC++ Controller with a very high amperage H-Bridge канала Dave Bodnar
For more information see:
http://trainelectronics.com/DCC_Arduino/DCC++/
Видео DCC++ Controller with a very high amperage H-Bridge канала Dave Bodnar
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Using BTS7960 PWM H Bridge motor controller module with Arduino libraryHow to Build a Power Controller for Your Model RailroadHow to work with BTS7960 motor driver and ArduinoRailCom vs. Transponding (Video#39)How to Wire DCC for under £20 with No Soldering!Railroad Automation with JMRIMeasuring 5A-30A AC and DC current using Allegro ACS712 with Robojax Library (code added into video)Using a MicroWave SensorAn Arduino DCC++ Base Station: The Hardware - Part 2 of 4useless machinePower MOSFET H-Bridge UpdateMegaPoints Controllers Bouncing Semaphore UpdateModel Railroad Signals Made Simple Part 1Electronics Tools, Tips, Tricks & Techniques - PART 1Exciting news on the MegaPoint Servo Controller Board 16-09-2017Double BTS7960B H bridge wiper motor servoThe L298N H-bridge motor controller module - basicsArduino BIG Stepper Motor control. Rotary Axis for milling machine.88. DCC for a Blue Box Athearn LocoArduino to Raspberry Pi Serial Communication