Загрузка страницы
Все видеоНовые видеоПопулярные видеоКатегории видео

Brown & Sharpe Surface Plate Stand Modifications

After picking up a used Brown & Sharpe surface plate, I decided that I needed to make a few modifications to the stand that it sits on including a three point leveling system under the stone as well as proper leveling feet on the stand itself, a fresh paint job and some raised angles to hold the plate in place.

Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery

Please Visit: http://www.vintagemachinery.org

Sponsored by:
American Rotary Phase Converters
https://www.americanrotary.com/?sld=krucker
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!

Видео Brown & Sharpe Surface Plate Stand Modifications канала Keith Rucker - VintageMachinery.org
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
23 сентября 2016 г. 14:07:25
00:31:26
Keith Rucker - VintageMachinery.org
Теги
Правообладателям
Жалоба
Комментарии
Другие видео канала
Camelback Drill Press Gears 2: Cutting Gear Teeth on the First GearCamelback Drill Press Gears 2: Cutting Gear Teeth on the First GearDiresta Bandsaw Restoration 27: Finishing the Bottom Wheel and Installing the TableDiresta Bandsaw Restoration 27: Finishing the Bottom Wheel and Installing the TableHorizontal Boring Mill Restoration: Installing the Table Lead Screw and Tailstock BaseHorizontal Boring Mill Restoration: Installing the Table Lead Screw and Tailstock BaseLucas Horizontal Boring Mill Restoration: Making a Morse Taper No. 5 Tailstock AdapterLucas Horizontal Boring Mill Restoration: Making a Morse Taper No. 5 Tailstock AdapterCutting Spur Gears on a Kearney & Trecker 3H Horizontal Milling MachineCutting Spur Gears on a Kearney & Trecker 3H Horizontal Milling MachineRepairing the Rapid Traverse Clutch Pack on a Kearny & Trecker 2H Horizontal MillRepairing the Rapid Traverse Clutch Pack on a Kearny & Trecker 2H Horizontal MillGlover Steam Locomotive Dash-Pots: Re-Valved, Re-Seated, Restored!Glover Steam Locomotive Dash-Pots: Re-Valved, Re-Seated, Restored!Metal Planer Restoration 70: Way WipersMetal Planer Restoration 70: Way WipersMonarch 10EE Lathe Gear Segment, Part 4: Grinding to Length and Drilling PinsMonarch 10EE Lathe Gear Segment, Part 4: Grinding to Length and Drilling PinsLucas Horizontal Boring Mill Restoration: Turning and Installing a New Bronze BushingLucas Horizontal Boring Mill Restoration: Turning and Installing a New Bronze BushingHorizontal Boring Mill Restoration: Milling an End Spline to Repair the Crank HandleHorizontal Boring Mill Restoration: Milling an End Spline to Repair the Crank HandleWells Index Mill: Repairing the Tilt Gear - Part 2Wells Index Mill: Repairing the Tilt Gear - Part 2Camelback Drill Press Gears - Part 1: Making the First Gear RingCamelback Drill Press Gears - Part 1: Making the First Gear RingHorizontal Boring Mill: Making a new Lead Screw Nut with Internal Left Hand Acme Threads - Part 1Horizontal Boring Mill: Making a new Lead Screw Nut with Internal Left Hand Acme Threads - Part 1Monster Cane Mill Restoration: Brazing Broken Nickel Welds on the Main Cast Iron Mill BaseMonster Cane Mill Restoration: Brazing Broken Nickel Welds on the Main Cast Iron Mill BaseSugar Cane Mill Restoration: Machining Custom Square Head Nuts on the Metal LatheSugar Cane Mill Restoration: Machining Custom Square Head Nuts on the Metal LatheJimmy Diresta Bandsaw Restoration 21: Machining a New Upper Wheel Shaft with a Tapered SpindleJimmy Diresta Bandsaw Restoration 21: Machining a New Upper Wheel Shaft with a Tapered SpindleMonarch 16" Lathe Restoration 7: Clearing Oil LinesMonarch 16" Lathe Restoration 7: Clearing Oil LinesB-17 Bomber Restoration: Broaching a Square Hole for Landing Gear PartB-17 Bomber Restoration: Broaching a Square Hole for Landing Gear PartCamelback Drill Gears 3: Making a Gear Arbor with Integrated 15 Tooth GearCamelback Drill Gears 3: Making a Gear Arbor with Integrated 15 Tooth GearLandis Surface Grinder: Boring and Bushing the worn Pulley BoreLandis Surface Grinder: Boring and Bushing the worn Pulley Bore
Статистика портала
Яндекс.Метрика
© 2008-2024 «Информационно-развлекательный портал города Верхняя Салда»
| Карта портала | Реклама | Контакты | Сообщить об ошибке | Соглашения
salda.ws salda.ws@mail.ru
Сейчас на сайте: 512 Статистика портала