Electric Porsche 911 project video 49 - Using CAD (Cardboard Aided Design) to create some mounts

#ElectricPorsche #EVConversion #ElectricCars
#Electric911 #Porsche996
Instagram - https://www.instagram.com/perf_ev/
Twitter - https://twitter.com/PerformanceEv

Welcome to the channel, this is where we do EV conversions on fun and interesting cars and try to get as much power as possible from the mainstream OEM EV components currently available today. Our current project is to build an Electric Porsche 911 using the inverter, motor and battery pack from a Nissan Leaf. The subject of our Electric Conversion is a 1998 Porsche 996 Carrera S. I hope you enjoy following our progress through the project.

Now that we have a solid idea of where the battery box is going to mount to in our Nissan Leaf powered Electric Porsche 911, we can start the process of actually designing the mounting points and brackets to hold it securely in place. Fitting the battery box in the Porsche is proving more challenging than a lot of cars as it is going to be suspended between the frame rails, rather than being able to sit on them as it would in many front engined cars.

To add to my challenges the engine mounting that I put in place earlier in the project is in the way of where I want to place the battery box mounts, so I have to undo a lot of my previous work.
About the control system we're using:
The board I have chosen is the "Open Inverter" logic board with a Nissan Leaf adaptor board. Full details of this open source inverter can be found here:
https://openinverter.org
And the boards are available to purchase through the shop.
The one I am using is:
https://openinverter.org/shop/index.php?route=product/product&product_id=57

There is also a community growing around these and associated boards built on the same architecture and software here.
https://openinverter.org/shop/
I have no association to this other than liking the design and simplicity of the product and I will let you all know how I get on with the boards in future videos.
https://openinverter.org/forum/
Music used in this video:
Rev - Eveningland ► https://www.youtube.com/watch?v=LdshrTrIrfk
Palmtrees - The Brothers Records ► https://www.youtube.com/watch?v=C9PpSDF_Ws8

We do builds and projects with electric motors and on electric vehicles, with a focus on electric car conversions. The automotive world is moving towards electric cars at a great pace, but a lot of these are focussed on the mass market or are very expensive performance vehicles.

We want to see what can be done to create our own performance electric cars using the currently available components. We'll take you through every step of our projects (both successes and failures.)

Please come and join us on this journey.

A note on this channel.
While we try to make these videos as informative as possible, these are not instructions or how to videos. Working with high voltage electrical components is very dangerous and can injure, maim or kill. The same goes for working on cars and motorbikes. If these videos have inspired you to take on an EV project of your own, and we hope they have, we would encourage you to undertake the necessary study, education, training and/or investigations to familiarize yourself with tasks you are undertaking. Thanks for watching and we hope you have enjoyed the video.

Видео Electric Porsche 911 project video 49 - Using CAD (Cardboard Aided Design) to create some mounts канала Performance EV