BTT TFT35 dual mode touch screen guide
I'm a fan of touch screens, previously using the MKS TFT28 on a few 3D printers. There was some drawbacks, and understandably some people prefer the standard LCD display. Now the Bigtreetech TFT35 introduces new features and has the ability to switch back and forth between touchscreen and traditional LCD in seconds; it's the best of both worlds. These are a great match for any of the new BTT SKR boards, but are also compatible with ramps based boards such as the MKS Gen L.
This is a guide to installation and configuration, everything is timestamped below for your convenience. In case it wasn't clear, no firmware changes are required for the 3D printer.
Of the two TFT35s in this video, one I purchased as a customer and the other was provided free of charge by BTT. All opinions expressed are my own.
*UPDATE* Currently Octoprint + TFT35 works with the SKR mini E3 but NOT ALWAYS with the SKR V1.3. It seems the order in which they connect might be important, but I did manage to get both going at once.
Tip from viewer Dale for the SKR Mini E3 V2.0 connect easily to Octoprint when using a BTT TFT as well. Add this line to the "Additional Serial Ports" in settings: /dev/serial/by-id/usb-LeafLabs_Maple-if00
Purchase the TFT35 E3:
Aliexpress: https://s.click.aliexpress.com/e/_d8nzWpS
Amazon: https://s.click.aliexpress.com/e/_dZZqpdI
SKR Mini E3 + TFT35 bundle from Amazon: https://amzn.to/36xbG3m
Purchase the TFT35 E3 NON E3
Amazon: https://amzn.to/2RsVnjR
Aliexpress: https://s.click.aliexpress.com/e/_dUWjk3Q
Banggood (with WIFI): https://www.banggood.com/custlink/GKGmQUm23O
BTT TFT firmware download: https://github.com/bigtreetech/BIGTREETECH-TouchScreenFirmware
TFT35 V3.0 github page: https://github.com/bigtreetech/BIGTREETECH-TFT35-V3.0
TFT35 E3 V.30 github page: https://github.com/bigtreetech/BTT-TFT35-E3-V3.0
01:41 Specs, price and overview
02:50 Resources
03:27 Compatibility
04:30 Wiring
Connection diagrams: https://imgur.com/a/3GBUKDR
07:36 Firmware update process
09:16 Custom graphics
10:42 Custom firmware changes
12:05 Filament runout
13:26 Touch screen operation
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
Видео BTT TFT35 dual mode touch screen guide канала Teaching Tech
This is a guide to installation and configuration, everything is timestamped below for your convenience. In case it wasn't clear, no firmware changes are required for the 3D printer.
Of the two TFT35s in this video, one I purchased as a customer and the other was provided free of charge by BTT. All opinions expressed are my own.
*UPDATE* Currently Octoprint + TFT35 works with the SKR mini E3 but NOT ALWAYS with the SKR V1.3. It seems the order in which they connect might be important, but I did manage to get both going at once.
Tip from viewer Dale for the SKR Mini E3 V2.0 connect easily to Octoprint when using a BTT TFT as well. Add this line to the "Additional Serial Ports" in settings: /dev/serial/by-id/usb-LeafLabs_Maple-if00
Purchase the TFT35 E3:
Aliexpress: https://s.click.aliexpress.com/e/_d8nzWpS
Amazon: https://s.click.aliexpress.com/e/_dZZqpdI
SKR Mini E3 + TFT35 bundle from Amazon: https://amzn.to/36xbG3m
Purchase the TFT35 E3 NON E3
Amazon: https://amzn.to/2RsVnjR
Aliexpress: https://s.click.aliexpress.com/e/_dUWjk3Q
Banggood (with WIFI): https://www.banggood.com/custlink/GKGmQUm23O
BTT TFT firmware download: https://github.com/bigtreetech/BIGTREETECH-TouchScreenFirmware
TFT35 V3.0 github page: https://github.com/bigtreetech/BIGTREETECH-TFT35-V3.0
TFT35 E3 V.30 github page: https://github.com/bigtreetech/BTT-TFT35-E3-V3.0
01:41 Specs, price and overview
02:50 Resources
03:27 Compatibility
04:30 Wiring
Connection diagrams: https://imgur.com/a/3GBUKDR
07:36 Firmware update process
09:16 Custom graphics
10:42 Custom firmware changes
12:05 Filament runout
13:26 Touch screen operation
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
Видео BTT TFT35 dual mode touch screen guide канала Teaching Tech
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
F1 in Schools Australian Final 2018 VLOG | Clutch ControlFlexible CAD designs using variables - 3D design for 3D printing pt8How to automate everything in your yard - ESP8266 Arduino guideMastering fuzzy skin - 3D printing guideAnswering your CAD requests - 3D design for 3D printing pt9DIY conveyor belt delta bed assembly videoCreating sloppy parts to ensure perfect fit - 3D design for 3D printing3D printer calibration site V2 - Still free and better than ever!Endless 3D printing - DIY conveyor belt delta bedRemix STEP files to suit your needs - 3D design for 3D printing2019 Q&A + channel announcementComplex design from start to finish - 3D design for 3D printing pt11Full colour first layers on your 3D prints part 2 - Laser and inkjet printers too!Parts that fit odd shaped objects - 3D design for 3D printing pt4Cams are simple to design but oh so versatile - Guide with examplesMake your parts bendy with this design hack - 3D design for 3D printingTool holder using Onshape sketches and extrusion - 3D design for 3D printing pt2Practical 3D printing - Ant Keeping3D printed large CNC: Lowrider2 upgradesHow to create effective compliant mechanisms with 3D printingDesigning and assembling parts with screw threads & gears - 3D design for 3D printing pt6