Creating sloppy parts to ensure perfect fit - 3D design for 3D printing

To get the best out of 3D printing, it helps if you can design your own parts. In this tutorial series, we will learn to use a free 3D CAD program to do just that.

In this episode, I demonstrate two projects with geometry that needs to be spot on. Rather than design and print over and over until the fit is perfect, I demonstrate purposely creating pas with too much clearance that can be bolted into the perfect place once in position.

0:00 Introduction
3D design for 3D printing Onshape playlist: https://www.youtube.com/playlist?list=PLGqRUdq5ULsONnjEEPeBxxStEsobDKAtV
Direct link to create a free account: https://www.onshape.com/en/products/free
Source CAD for tutorials: https://cad.onshape.com/documents/b5475ccd1f83733e348c59b0/w/f0f78c61f2ac76b0b03c0692/e/2693d666ff5f1d3749f8b85d?renderMode=0&uiState=62fb0fbda209767dfe1e6bf0

0:43 Scenario 1: Tablet holder
Digital calipers on Amazon : https://amzn.to/3Bu6yjN

4:49 Scenario 2: Electronic door controller
Backyard automation video: https://youtu.be/Hz5E83ftKio

11:06 Conclusion

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

Видео Creating sloppy parts to ensure perfect fit - 3D design for 3D printing канала Teaching Tech