4x4 PTO Driven Timber Trailer BUILD Ep.2 - Tandem Axle

4x4 PTO driven timber trailer tandem axle build. Cutting out chain housing parts on the homemade CNC plasma table. Using 6mm S355 steel for the housings. Sprockets and bearings are off-the-shelf parts I ordered from a farmer store. There will be a 100mm chain tensioner sprocket instead of the 210mm drive sprocket I used to illustrate where the chain tensioner is going to be located. Gonna start welding the housings together next week. New video next week if all goes as planned. Stay tuned!

Trailer specs:
* 28x11-14" tires & 14" rims
* 1450mm/57" wide; length and height - unknown
* tandem axles with homemade chain housings
* BMW E39 530D differential with 2.81 gearing (identical to the UTV diffs)
* hydraulic crane with a boom & grapple for easier log loading & handling
* independent hydraulic power pack
* radio controlled hydraulic winch on the boom
* load capacity - 1-1,5 tonne

Stay tuned for the next episode & thanks for watching!

My other videos: https://www.youtube.com/DonnDIY/videos
Support me on: https://www.patreon.com/DonnDIY
Follow me on: https://www.instagram.com/DonnDIY

Homemade 4x4 UTV build: https://youtube.com/playlist?list=PLkmF7FAZBzkUZ3GjEo97GkWajmj9bCxzE

#donndiy #homemade #timbertrailer

Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter

Видео 4x4 PTO Driven Timber Trailer BUILD Ep.2 - Tandem Axle канала Donn DIY