UTV Snow Plow BUILD - Part 2

Fabricating electrically controlled snowplow from scratch for my homemade 4x4 utility terrain vehicle/UTV/ATV (build link below). I'm using pieces of scrap steel I purchased from a local steel shop thus the blade being rolled from six individual pieces that (conveniently) fit into my homemade sheet metal roller. The strengthening strips are cut on the homemade CNC plasma table (link below). To control the blade side-to-side movement I'm installing a 12v ATV/UTV winch. I built the plow frame and the blade in the previous video: https://youtu.be/BltkMvWva7A

Stay tuned for future videos! Thanks for watching!

My other videos: https://www.youtube.com/DonnDIY/videos
Support me on: www.patreon.com/DonnDIY
Follow me on: www.instagram.com/DonnDIY

Homemade CNC plasma build: https://youtube.com/playlist?list=PLkmF7FAZBzkV6_Mv8DH6JB4BS3VyVE33K

Homemade 4x4 UTV build: https://youtube.com/playlist?list=PLkmF7FAZBzkUZ3GjEo97GkWajmj9bCxzE

#donndiy #homemade #snowplow

Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter

Видео UTV Snow Plow BUILD - Part 2 канала Donn DIY