BMW E30 325i Sport Restoration - Prototype Parts For the Chassis Ep 5
Go to https://buyraycon.com/restoreit for 15% off your first order! Brought to you by Raycon.
In this episode of the BMW E30 325i Sport chassis restoration. I get my hands on some pressed panels from E30 Garage Norway (@e30garage.norway on Instagram) A company that's dedicated to providing NLA E30 parts (no longer available parts). An epic thing to be doing.
I unbox the first of thee parcels coming from them. These will help me speed up the chassis restoration tenfold. With these panels, I will save so much fabricating time and also the embarrassment of making parts nowhere near as refined as these.
These panels are exact copies of real panels cut from real BMW E30's. They have so many new parts coming for all of the E30's including the M3. Check them out on FB or Insta and send them a message if you need any advice on parts you may need. They seriously know what they're talking about.
I also prepare the prototype seat belt bracket E30GN sent to me. I had to make a few changes to make it fit properly but this isn't something you'll have to do once the design is complete.
I then weld it in place using a variety of plug welds, spot welds, and bead welds.
E30 Garage Norway!
Facebook - https://www.facebook.com/E30garageNorway/
Instagram - https://www.instagram.com/e30garage.norway/?hl=en
Thanks for watching! Subscribe with the bell on to see this car back to factory condition!
#restoration #BMWE30 #carproject
Thanks to FCP Euro for supplying parts for this restoration and supporting the channel. Get a lifetime guarantee on all parts here - https://hubs.ly/H0kPPZW0
Get a Shop Manual for Your Car: http://shrsl.com/1rdef
(Available for Most Makes and Models)
#Engine #BMWE30 #Restoration
Tools & equipment used:
Rohr 250Mi-11 Welder - https://bit.ly/33mkOGP
Quartz Lacquer - https://goo.gl/8PTVKM
Base Coat Paint - https://goo.gl/mWhufG
Rust Remover - https://goo.gl/13gopW
Rohr 250 Welder - https://bit.ly/33mkOGP
U-Pol Weld Through Primer #2 - https://bit.ly/2qL38ak
Fast Mover 1kW Infrared Paint Dryer, Stand, Timer - https://bit.ly/2WYR9jJ
Workbenches - https://arborgardensolutions.co.uk
Moldex Full Face Mask - https://goo.gl/NNYGrv
FGL 5 Spray gun - https://goo.gl/Acg5rd
A.N.I. R150-T Mini Spray gun - https://goo.gl/cHTJS2
Colad Washable Overalls - https://goo.gl/3Css9E
Colad Mixing Cups - https://goo.gl/8DYmE8
Colad TurboMix Sticks - https://goo.gl/cYZfks
Colad Synthetic Paint Strainers - https://goo.gl/H79ZgL
Steel wire bits - http://geni.us/keyaD
Blasting Cabinet - https://bit.ly/2GxvKJ7
Blasting pot - https://bit.ly/32TMnrU
Cordless Ratchet - https://bit.ly/30YNlkG
Parts Wahser - https://bit.ly/2K5G9wA
Rotary Tool - http://geni.us/HGed
Concentrate Degreaser - http://geni.us/yUn9
Mannesmann Socket Set - http://geni.us/HCDZ
Time Stamps:
00:00 – Intro and unboxing of new parts
00:40 – Recap on seat belt bracket removal
00:58 – Introducing the prototype seal belt bracket
01:19 – Marking and cutting the bracket to size
04:47 – Drilling out the spot welds to remove the threads
03:29 – Sponsor – Raycon – Buyraycon.com/restoreit for 15% off your order
04:45 – Cleaning up the threads
04:58 – Welding the threads to the bracket
06:22 – Cutting holes in the chassis to weld through
07:10 – Drilling holes into the bracket so it can be plug welded
07:47 – Preparing the are for welding
08:02 – Repairing some damage from the removal
08:40 – Final mods to the bracket
09:03 – Installing the bracket for the final time and welding it in
09:22 – Using nuts and bolts to force the bracket into place and shape
10:12 – Priming for protection with zinc-rich upol weld through primer
10:55 – Grinding back the welds
11:09 – Tapping a damaged thread and testing the bolts fit
11:24 – Removing some undercoating
11:33 – Priming the underside of the bracket
12:03 – Sealing everything from the other side
12:30 – Final grind and paint, as well as showing the undercoating and A.N.I air gun to apply it in the future.
Follow me on Social media to keep up to date with videos and behind the scenes.
My Patreon Page:
https://www.patreon.com/RestoreIt
My Twitter Page:
https://twitter.com/Restore__It
My Facebook Page:
https://www.facebook.com/RestoreItCha...
My Instagram Page:
@RestoreItChannel
PayPal Donations:
Restoreitchannel@gmail.com
Discord
I now also have a discord server if you want to chill with like-minded people and maybe learn something new.
https://discord.gg/vNmCBk9
Видео BMW E30 325i Sport Restoration - Prototype Parts For the Chassis Ep 5 канала Restore It
In this episode of the BMW E30 325i Sport chassis restoration. I get my hands on some pressed panels from E30 Garage Norway (@e30garage.norway on Instagram) A company that's dedicated to providing NLA E30 parts (no longer available parts). An epic thing to be doing.
I unbox the first of thee parcels coming from them. These will help me speed up the chassis restoration tenfold. With these panels, I will save so much fabricating time and also the embarrassment of making parts nowhere near as refined as these.
These panels are exact copies of real panels cut from real BMW E30's. They have so many new parts coming for all of the E30's including the M3. Check them out on FB or Insta and send them a message if you need any advice on parts you may need. They seriously know what they're talking about.
I also prepare the prototype seat belt bracket E30GN sent to me. I had to make a few changes to make it fit properly but this isn't something you'll have to do once the design is complete.
I then weld it in place using a variety of plug welds, spot welds, and bead welds.
E30 Garage Norway!
Facebook - https://www.facebook.com/E30garageNorway/
Instagram - https://www.instagram.com/e30garage.norway/?hl=en
Thanks for watching! Subscribe with the bell on to see this car back to factory condition!
#restoration #BMWE30 #carproject
Thanks to FCP Euro for supplying parts for this restoration and supporting the channel. Get a lifetime guarantee on all parts here - https://hubs.ly/H0kPPZW0
Get a Shop Manual for Your Car: http://shrsl.com/1rdef
(Available for Most Makes and Models)
#Engine #BMWE30 #Restoration
Tools & equipment used:
Rohr 250Mi-11 Welder - https://bit.ly/33mkOGP
Quartz Lacquer - https://goo.gl/8PTVKM
Base Coat Paint - https://goo.gl/mWhufG
Rust Remover - https://goo.gl/13gopW
Rohr 250 Welder - https://bit.ly/33mkOGP
U-Pol Weld Through Primer #2 - https://bit.ly/2qL38ak
Fast Mover 1kW Infrared Paint Dryer, Stand, Timer - https://bit.ly/2WYR9jJ
Workbenches - https://arborgardensolutions.co.uk
Moldex Full Face Mask - https://goo.gl/NNYGrv
FGL 5 Spray gun - https://goo.gl/Acg5rd
A.N.I. R150-T Mini Spray gun - https://goo.gl/cHTJS2
Colad Washable Overalls - https://goo.gl/3Css9E
Colad Mixing Cups - https://goo.gl/8DYmE8
Colad TurboMix Sticks - https://goo.gl/cYZfks
Colad Synthetic Paint Strainers - https://goo.gl/H79ZgL
Steel wire bits - http://geni.us/keyaD
Blasting Cabinet - https://bit.ly/2GxvKJ7
Blasting pot - https://bit.ly/32TMnrU
Cordless Ratchet - https://bit.ly/30YNlkG
Parts Wahser - https://bit.ly/2K5G9wA
Rotary Tool - http://geni.us/HGed
Concentrate Degreaser - http://geni.us/yUn9
Mannesmann Socket Set - http://geni.us/HCDZ
Time Stamps:
00:00 – Intro and unboxing of new parts
00:40 – Recap on seat belt bracket removal
00:58 – Introducing the prototype seal belt bracket
01:19 – Marking and cutting the bracket to size
04:47 – Drilling out the spot welds to remove the threads
03:29 – Sponsor – Raycon – Buyraycon.com/restoreit for 15% off your order
04:45 – Cleaning up the threads
04:58 – Welding the threads to the bracket
06:22 – Cutting holes in the chassis to weld through
07:10 – Drilling holes into the bracket so it can be plug welded
07:47 – Preparing the are for welding
08:02 – Repairing some damage from the removal
08:40 – Final mods to the bracket
09:03 – Installing the bracket for the final time and welding it in
09:22 – Using nuts and bolts to force the bracket into place and shape
10:12 – Priming for protection with zinc-rich upol weld through primer
10:55 – Grinding back the welds
11:09 – Tapping a damaged thread and testing the bolts fit
11:24 – Removing some undercoating
11:33 – Priming the underside of the bracket
12:03 – Sealing everything from the other side
12:30 – Final grind and paint, as well as showing the undercoating and A.N.I air gun to apply it in the future.
Follow me on Social media to keep up to date with videos and behind the scenes.
My Patreon Page:
https://www.patreon.com/RestoreIt
My Twitter Page:
https://twitter.com/Restore__It
My Facebook Page:
https://www.facebook.com/RestoreItCha...
My Instagram Page:
@RestoreItChannel
PayPal Donations:
Restoreitchannel@gmail.com
Discord
I now also have a discord server if you want to chill with like-minded people and maybe learn something new.
https://discord.gg/vNmCBk9
Видео BMW E30 325i Sport Restoration - Prototype Parts For the Chassis Ep 5 канала Restore It
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
BMW E30 325i Sport Restoration - Serious Chassis RepairBMW E30 M20B25 Engine Rebuild Restoration - | Part 9 | Putting It Back Together AgainBMW E30 Gas Tank RestorationRestoring a BMW E30 M3 EVO2 in 9 minutes!1991 BMW 330iS M54 E30 M Tech 2 Restoration ProjectBMW E30 325i Touring Engine Bay [Restoration] - Almost Finished!110 Year Old Hand Saw Restoration - Disston & Sons, Inc.BMW E30 | KAUFBERATUNG | by BBM MotorsportBMW E30 325 Touring Engine Bay Restoration - I Found The Missing PieceBMW E30 BOSCH Headlights Restoration Part 1BMW E30 Touring Engine Bay Restoration | Installing The EngineBMW E30 M3 Front and Rear Subframe [Restoration]Rebuilding A BMW E30 325i Sport | Part 1 - Making The Chassis Great AgainOld British Drill Restoration | Vintage Black & Decker Gold Series 1/2"BMW E30 Chassis Shot Blasting Time-lapse Restoration | BMW E30 325i Sport Restoration S1E10BMW E30 Dashboard [Restoration]BMW E28 Subframe Restoration | Part 2Rebuilding A BMW E30 Sport | Part 3 - Butt or Lap Welds?RUST REPAIR E30Rusty Mercedes Windscreen - Restoration