Restoration Rusty Handmade Giant Knife
Hello folks! Today I want to show you my new restoration project! Few months ago, I bought this giant knife. It was just piece of good material which needed a lot of work.
Restoration process:
I went to a large workshop and used a milling machine to remove 0.5 cm from both side.
Then, I started to use anglegrinder machine to correct shape of knife.
I used a lot of sandpapers for sanding.
Further I used grindingmachine and a lot of work of files to made correct line around the knife.
When I made bevel on the blade, the belt of sandpaper broke and I continued to work manually.
After, I polished knife little via sandpapers and then started to made knife handle.
Knife handle I made from oak tree and used copper rivets.
To heat treat the blade, I had to go to another workshop and make it there. I don't have a big oven. Tempering of the blade made at home.
After I cleaned the blade and used iron chloride, to prevent the blade from rusting.
Next step was, I sharpened the knife and made a special stand for it.
And finally I made interesting knife test for you. I hope you will enjoy this restoration video.
Thank you! Please, Like and Subscribe to my channel: http://bit.ly/2FZ43bV
Facebook: http://bit.ly/2LnIwxB
Instagram: http://bit.ly/2Gbnvlt
Channel support: https://bit.ly/2plh0r6
#screwsandtools #knife #restoration
Видео Restoration Rusty Handmade Giant Knife канала Screws And Tools
Restoration process:
I went to a large workshop and used a milling machine to remove 0.5 cm from both side.
Then, I started to use anglegrinder machine to correct shape of knife.
I used a lot of sandpapers for sanding.
Further I used grindingmachine and a lot of work of files to made correct line around the knife.
When I made bevel on the blade, the belt of sandpaper broke and I continued to work manually.
After, I polished knife little via sandpapers and then started to made knife handle.
Knife handle I made from oak tree and used copper rivets.
To heat treat the blade, I had to go to another workshop and make it there. I don't have a big oven. Tempering of the blade made at home.
After I cleaned the blade and used iron chloride, to prevent the blade from rusting.
Next step was, I sharpened the knife and made a special stand for it.
And finally I made interesting knife test for you. I hope you will enjoy this restoration video.
Thank you! Please, Like and Subscribe to my channel: http://bit.ly/2FZ43bV
Facebook: http://bit.ly/2LnIwxB
Instagram: http://bit.ly/2Gbnvlt
Channel support: https://bit.ly/2plh0r6
#screwsandtools #knife #restoration
Видео Restoration Rusty Handmade Giant Knife канала Screws And Tools
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Trash To Cash! Knifemaking / Restoration Of The UGLIEST Flea Market Knife EverHow To Restore Rusty Knife - Restoration Video TutorialOld Rusty Handmade Knife RestorationBowie Knife RestorationBroken Deadlocked Vise - Perfect Restoration (I did it again)Old Rusty Knife Restoration - Turn Into High-End Japanese Chef's KnifeRusted Claw Hammer - Perfect RestorationOld Rusty USSR Sanitary Knife RestorationRestoration Antique Rusty Butcher KnifeI Turn Rust in to a Piece of Art / 24k GoldRusty bone grinder - RestorationOld Rusty Handmade Axe Restoration1900s Door Mortiser [Restoration]Turn A 2€ Rusty Knife Into High-End Japanese Chef's Knife5$ Rusty Japanese Knife RestorationVintage hunter knife RestorationFabricación de cuchillo Bowie cazadorAxe modification. Rusty axe restoration.Door closer - RestorationBroken Tip Italian Slicer Knife Restoration | Knifemaking