3/8” Cyclone Cable Setup Video 5

Cyclone is set and ready for use reminder always make sure sheathing at rear is cut cleaned and oiled regularly. This is where all your heat and tension is on the system. If it is not oiled or kept cut evenly you will get poor results when using. Also if you struggle running it within the cable carrier straighten the cable out until you get the feel for keeping it within the carrier. Also when the cable is ran straight you will get less restriction and it will work it’s best. So when at all possible push the cable all the way out and run on the way back. This will result in its optimal performance.

Видео 3/8” Cyclone Cable Setup Video 5 канала CustomEyes Cameras