How to Make Termite Shields for Older Homes
Making shields as a physical barrier for subterranean termites out of galvanized metal flashing. These shields go on top of the CMU (concrete masonry unit / concrete block) piers, several inches above grade (at least 6-8" above finish grade). Drill holes through the top of the shield (not the edge where the termites crawl) the anchor bolts go through the shields, but then construction grout covers the holes and fills the gap between the shield and the structural framing. Add a vapor barrier to prevent vapor transmission from the concrete to the wood and you're set.
Physical termite shields are not a substitute for chemical treatment of termites, and physical shields obviously do nothing for drywood flying termites.
See this article before commenting:
https://basc.pnnl.gov/images/metal-termite-shields-make-it-easier-see-termite-tunnels-and-may-discourage-termite-access
Видео How to Make Termite Shields for Older Homes канала Abode Building Company
Physical termite shields are not a substitute for chemical treatment of termites, and physical shields obviously do nothing for drywood flying termites.
See this article before commenting:
https://basc.pnnl.gov/images/metal-termite-shields-make-it-easier-see-termite-tunnels-and-may-discourage-termite-access
Видео How to Make Termite Shields for Older Homes канала Abode Building Company
Показать
Комментарии отсутствуют
Информация о видео
18 августа 2023 г. 21:00:40
00:00:34
Другие видео канала
Cedar Shingle Siding Start to Finish - the "Hula Skirt"Stabilizing Pier Foundation without Cutting Through the Floor, Digging Holes, or Pouring ConcreteCraftsman Brackets - field made roof-to-wall supports, both decorative & functionalMatching Historical Concrete BlockFun Business Trip to Key West for a Crawlspace InspectionCrawlspace ClearingFloor Joist Sister Repair in Crawlspace with Cedar in Orlando, FloridaFixing Creaky, Bouncy Wood Floors in CrawlspaceCrawlspace Floor Repair, Carpentry, & Metal Jacks vs. PiersClearing and Cleaning Out a Crawlspace for Repairs and Vapor Barrier - Timelapse!First Look - DeWalt Worm Drive Circular Saw Kit DCS577Pouring a Concrete Pad Footing for a Concrete Pier Under Crawlspace of Craftsman Bungalow in OrlandoHow to Jack Up a House from Underneath / Crawlspace Using Bottle Jack, Grade Stick, and Laser LineCrawlspace is a Tight Space (1 of 2) Prep for Jacking Up FloorThings Don't Always Go As PlannedHow to Clean Out a Crawlspace Before Installing Vapor Barrier - HINT: There's No Easy Way!How to Build Termite Shield from MetalCelebrity Appearance!Sistering floor joists due to termite damage in crawlspace (and how to use a nail gun!)How to Make Fake (Faux) Stone on Concrete Block from StuccoEveryone's talking about the HEAT... This is how you stay HYDRATED on a construction site.