Ricoh Waste Toner Bottle Full Error Fix |Waste Toner full error despite Waste Toner Bottle is Empty

A Ricoh waste toner bottle error, despite emptying it, usually means the sensor is dirty, the bottle is misaligned, or the printer requires a hard reset. To fix, reseat the bottle firmly, clean the sensor area, restart the machine, or clean the waste toner chute.

Common Solutions for Ricoh Waste Toner Errors:

Reseat the Bottle: Ensure the waste toner bottle is pushed in completely until it clicks into place.

Clean the Sensor: The sensor that detects a full bottle may be covered in toner dust. Locate the sensor inside the bottle compartment and clean it.

Power Cycle the Printer: Turn off the printer, wait at least 60 seconds, and then turn it back on to reset the sensors.

Check the Front Cover: Ensure the front cover is fully closed, as this can cause improper seating of the bottle.

Replace Bottle (If Necessary): If the problem persists, the sensor may not be recognizing the old bottle, and a new, genuine Ricoh waste toner bottle may be required.

If these steps do not work, it is recommended to call a Ricoh field technician, as the sensor itself could be damaged.

Видео Ricoh Waste Toner Bottle Full Error Fix |Waste Toner full error despite Waste Toner Bottle is Empty канала Milzo Tech