Explora Tailsitter VTOL
Explora Tailsitter VTOL it is entirely 3D printed with PLA, PETG, TPU and ABS filament.
After countless changes to the Ardupilot code our printable tailsitter is available, link at the bottom.
Some specifications:
- Cruising Speed: 15/17 m/s
- Stall Speed: 10 m/s
- Endurance: over 1h with Li-Ion battery, 40 minutes with Li-Po
- Max payload: 0.5Kg
- Applications: territorial control, photogrammetry, FPV
- Filament cost: around $40
- Minimum cost of material for complete set-up: around $600
- Cost of material for complete set-up: around $900
If anyone wants to collaborate on the project, they are welcome!
https://github.com/robustini/eXploraVTOL
Marco (Ardupilot Dev Team)
https://ardupilot.org/plane/docs/guide-tailsitter.html
Видео Explora Tailsitter VTOL канала Marco Robustini
After countless changes to the Ardupilot code our printable tailsitter is available, link at the bottom.
Some specifications:
- Cruising Speed: 15/17 m/s
- Stall Speed: 10 m/s
- Endurance: over 1h with Li-Ion battery, 40 minutes with Li-Po
- Max payload: 0.5Kg
- Applications: territorial control, photogrammetry, FPV
- Filament cost: around $40
- Minimum cost of material for complete set-up: around $600
- Cost of material for complete set-up: around $900
If anyone wants to collaborate on the project, they are welcome!
https://github.com/robustini/eXploraVTOL
Marco (Ardupilot Dev Team)
https://ardupilot.org/plane/docs/guide-tailsitter.html
Видео Explora Tailsitter VTOL канала Marco Robustini
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
!["Marcopter HV1 Heavy Hexa" - Second anti-vibration test with 2 axis brushless gimbal (Canon EOS M)](https://i.ytimg.com/vi/0TE6WDECqzA/default.jpg)
![First tests with "DJI Phantom 3 Professional" at "AVF - Helyteam" airfield (Ferrara - Italy)](https://i.ytimg.com/vi/Tqym8Ki1vu4/default.jpg)
![ArduCopter V2.8.2 - Loiter test (light wind)](https://i.ytimg.com/vi/I7gAIbHu7Z4/default.jpg)
![ArduCopter V2.5.0 Alpha - Daily test (Andrew Tridgell GIT)](https://i.ytimg.com/vi/WpdeRhomcrs/default.jpg)
!["Rescue FC" redundancy system preview - FCU switch tests...](https://i.ytimg.com/vi/z_DDv1Y1XPU/default.jpg)
![ArduCopter V2.3 - Loiter stress - High rate P/D value - Zero/Strong Wind (AeroSim)](https://i.ytimg.com/vi/klfpz35wh8w/default.jpg)
![L'efficacia dei sistemi antidrone - "Roma Drone Conference" (23 Marzo 2016)](https://i.ytimg.com/vi/30FqrtDCQvw/default.jpg)
![ArduCopter V2.9.1.2 (VR Brain) - Marco Scissorhands... :P](https://i.ytimg.com/vi/bOxvAYOF6lU/default.jpg)
!["AVF - Aeroclub Volovelistico Ferrarese"](https://i.ytimg.com/vi/Ph-YYZV3gS4/default.jpg)
![ArduCopter V2.9.2β "wpnavlib4" - Loiter test (max radius = 1.5 meter)](https://i.ytimg.com/vi/5cCQISBB4UA/default.jpg)
![I primi passi nel disegno 3D e nello slicing avanzato](https://i.ytimg.com/vi/fJdscqZMolE/default.jpg)
![ArduCopter V2.9.1.3 (VR Brain) - "Tarot FY650" payload test (1 Kg)](https://i.ytimg.com/vi/uL-W8on_DCg/default.jpg)
![Klipper: dai una nuova vita alla tua stampante 3d! (HOW-TO)](https://i.ytimg.com/vi/LK3f0eTbEaI/default.jpg)
!["DYS 3 Axis Gimbal" and "GoPro 4" - Tests at the "HelyTeam" airfield (APM:Copter)](https://i.ytimg.com/vi/WQ9hnsm3Ogw/default.jpg)
!["Volare in sicurezza" - Marco Robustini ("HMESE" 2015)](https://i.ytimg.com/vi/hN8UFi90GoE/default.jpg)
![Beta Technologies ALIA-250 - Ardupilot SITL in X-Plane 12](https://i.ytimg.com/vi/0f20kdmr9AU/default.jpg)
![First test with "Devilray" by "Carbondrone" and "3 axis DYS gimbal"](https://i.ytimg.com/vi/btpwGpo9bX0/default.jpg)
![Ardupilot with Realflight: advanced use](https://i.ytimg.com/vi/Yew-jMM2nMM/default.jpg)
!["YI 4K+ - DJI S900 - Pixhawk 2", vibration rating during fast flight](https://i.ytimg.com/vi/JtG4ZPOFD2I/default.jpg)
![ArduCopter V2.9 Final - Full uncutted clip](https://i.ytimg.com/vi/h6BTEubtCrs/default.jpg)
![Ardupilot - Testing LUA acrobatic scripts](https://i.ytimg.com/vi/pJ0lwV9t1uk/default.jpg)