ArduCopter V2.8.2 - Loiter test (light wind)
A good construction, setup and tuning can help... :-)
Sorry for the very poor video quality!
Special thanks to Rodolfo Liboni (the filmer)
Specs of the hexa:
- "Kamikaze Hexa" frame and 2 axis gimbal by Alessandro Parisi (AleBS)
- Mikrokopter MK3638 Motors, 14 poles, 770 rpm/v, 350W
- APC 12x3.8 SF Props
- HobbyKing F30A 30A ESC reflashed with "SimonK Firmware V.0930"
- ArduCopter APM2.5 Flight Control Board with U-Blox LEA-6H GPS (thanks Craig!)
- 3DR Radio 433 MHz telemetry
- 2 x Turnigy 4S 3600 mhA 30C LiPo
You can download my PID here: http://diydrones.com/forum/attachment/download?id=705844%3AUploadedFile%3A1013225
Bests, Marco
Please visit this forum for further information:
http://diydrones.com/forum/topics/arducopter-2-8-released
My profile:
https://www.facebook.com/marcouav
http://diydrones.com/profile/marco67
Видео ArduCopter V2.8.2 - Loiter test (light wind) канала Marco Robustini
Sorry for the very poor video quality!
Special thanks to Rodolfo Liboni (the filmer)
Specs of the hexa:
- "Kamikaze Hexa" frame and 2 axis gimbal by Alessandro Parisi (AleBS)
- Mikrokopter MK3638 Motors, 14 poles, 770 rpm/v, 350W
- APC 12x3.8 SF Props
- HobbyKing F30A 30A ESC reflashed with "SimonK Firmware V.0930"
- ArduCopter APM2.5 Flight Control Board with U-Blox LEA-6H GPS (thanks Craig!)
- 3DR Radio 433 MHz telemetry
- 2 x Turnigy 4S 3600 mhA 30C LiPo
You can download my PID here: http://diydrones.com/forum/attachment/download?id=705844%3AUploadedFile%3A1013225
Bests, Marco
Please visit this forum for further information:
http://diydrones.com/forum/topics/arducopter-2-8-released
My profile:
https://www.facebook.com/marcouav
http://diydrones.com/profile/marco67
Видео ArduCopter V2.8.2 - Loiter test (light wind) канала Marco Robustini
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
It's snow time at the HelyTeam Airfield (Ferrara - Italy)"Marcopter HV1 Heavy Hexa" - Second anti-vibration test with 2 axis brushless gimbal (Canon EOS M)First tests with "DJI Phantom 3 Professional" at "AVF - Helyteam" airfield (Ferrara - Italy)ArduCopter V2.4 - New motors test (easy and intuitive) - X QuadArduCopter V2.5.0 Alpha - Daily test (Andrew Tridgell GIT)"Rescue FC" redundancy system preview - FCU switch tests...ArduCopter V2.3 - Loiter stress - High rate P/D value - Zero/Strong Wind (AeroSim)L'efficacia dei sistemi antidrone - "Roma Drone Conference" (23 Marzo 2016)ArduCopter V2.9.1.2 (VR Brain) - Marco Scissorhands... :P"AVF - Aeroclub Volovelistico Ferrarese"ArduCopter V2.9.2β "wpnavlib4" - Loiter test (max radius = 1.5 meter)3DRobotics Pixhawk V2.4 fail during boot"DronAZZO" - Drying in the air after the stormI primi passi nel disegno 3D e nello slicing avanzatoArduCopter V2.9.1.3 (VR Brain) - "Tarot FY650" payload test (1 Kg)ArduCopter V2.9 Final - AutolandingKlipper: dai una nuova vita alla tua stampante 3d! (HOW-TO)"Volare in sicurezza" - Marco Robustini ("HMESE" 2015)Beta Technologies ALIA-250 - Ardupilot SITL in X-Plane 12First test with "Devilray" by "Carbondrone" and "3 axis DYS gimbal"