How to Rig an Anchor from 2 Bolts
AMGA Certified Rock Instructor Erik Kramer-Webb demonstrates 5 ways to equalize a 2 bolt anchor. The RENE acronym is used: Redundant, Equalized, and No Extension. This acronym is essentially the same as SRENE and ERNEST, but easier to remember.
Check out our classes offered in Joshua Tree National Park:
https://californiaclimbingschool.com
Видео How to Rig an Anchor from 2 Bolts канала California Climbing School
Check out our classes offered in Joshua Tree National Park:
https://californiaclimbingschool.com
Видео How to Rig an Anchor from 2 Bolts канала California Climbing School
Показать
Комментарии отсутствуют
Информация о видео
15 августа 2018 г. 12:45:48
00:09:38
Другие видео канала
Setting-up a Rappel from the TopHow to Set Up a Top Rope Anchor on Two BoltsA Primer on Climbing AnchorsClimbing Anchors from the Bolting BibleClimbing Quad Anchor break test with 240cm Black diamond dyneema slingAlpine AnchorsAdvanced Climbing Anchors: Efficient 3 Piece SystemsMulti-Pitch Rappelling- Potentially Fatal Errors to AvoidTransitions: Belaying From the TopHow to Clean Top Rope AnchorsFriction Hitch ComparisonHow to tie into the harness with Perfect Figure 8 knot every timeAdvanced Rappel TechniquesHow to Release a Weighted Self-Braking Device- Potentially Fatal Errors to AvoidWays To Use Bolted AnchorsHow To Tie The Auto-Block, Prusik And Klemheist Friction HitchesExtending the Master Point Over an Edge with a 50 ft. Static RopeMulti-Pitch Belaying- Potentially Fatal Errors to AvoidRock Climbing Anchors: Creating a Bolted Top Rope Anchor | Smart Rock Climbingtop rope anchor using 2 points