Simple 3D printed drip irrigation, gravity fed.
This is a simple planter irrigation system I made using four copies of a 3D printed part, some hose, and a bucket. I'm not sure yet if it will work long term or if I will have flow rate issues, but if it stands the test of time I think this will be a very good cheap system.
Try these links for Onshape files:
https://cad.onshape.com/documents/05f21b07090a4fffa88f7132/w/821bdab6e8974bfd8cd8d7a9
https://cad.onshape.com/documents/ef1e738b9b9c4f22b37cad32/w/bc45096f31ef47efbd69ef23
Видео Simple 3D printed drip irrigation, gravity fed. канала Taylor's Robots with Taylor Alexander
Try these links for Onshape files:
https://cad.onshape.com/documents/05f21b07090a4fffa88f7132/w/821bdab6e8974bfd8cd8d7a9
https://cad.onshape.com/documents/ef1e738b9b9c4f22b37cad32/w/bc45096f31ef47efbd69ef23
Видео Simple 3D printed drip irrigation, gravity fed. канала Taylor's Robots with Taylor Alexander
Показать
Комментарии отсутствуют
Информация о видео
30 июня 2015 г. 8:39:54
00:04:57
Другие видео канала
Rover V2 teaser.Rover robot takes its first few stepsLeeloo and the mouse!Brushless motor controller first spinFlutter Pitch at SRI May 06 2015December 2018 Rover Gearbox First TestFlutter Scout 3D printed robot slow motion loopsTwo wheel drive classroom robot updateRover gearbox update: many kilometers and looking good.Cheese!Starting the motor tester for a longer runFlutter rainbow heartTaking Rover out for a 2.0km drive!Rover metal pin gearbox updateRover V2 gearbox failure analysis.Brushless Motor Controller update March 2017December 2019 Rover update - Faster and more stable motor control.Rover Update September 2019 - Stereo Cameras and Jetson XavierRover V2 failed gearbox with plate removed.Acceleration control loop