MINDS-i Mission Planner Step #3C Radio Calibration
In this step I'll show you how to Calibrate your radio in Mission Planner for use with the MINDS-i Multirotor UAV kit. We'll look at first how to tell if your channels are normal or reversed, and how to reverse your channels in the DXe remote. We'll then calibrate our radio in the mission planner.
The kits are all made out of the same basic pieces, with helpful step by step instructions. The MINDS-i platform consists of simple beams and connectors that lock together to make a durable chassis.
What can you build?
Visit http://mindsirobotics.com/ to learn more.
Видео MINDS-i Mission Planner Step #3C Radio Calibration канала MINDS-i Education
The kits are all made out of the same basic pieces, with helpful step by step instructions. The MINDS-i platform consists of simple beams and connectors that lock together to make a durable chassis.
What can you build?
Visit http://mindsirobotics.com/ to learn more.
Видео MINDS-i Mission Planner Step #3C Radio Calibration канала MINDS-i Education
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
MINDS-i Mission Planner Step #7 Motor SetupArdupilot Flight Modes, Failsafe, Telemetry Radio Setup APM mission Planner - XUAV Mini Talon Part 7(4/8) APM 2.5/2.6/3.1 - Introduction to flight modes (stabilize, loiter, RTL etc)ESC CalibrationFlight tuning Arducopter 3.2K130 Octocopter + Pixhawk Connecting to Mission Planner and Motor TestingPixHawk/Mission Planner/ArduCopter Build for Beginners: Intro to Mission PlanningUAV Competition - Alabama State MINDS-i SkillsUSA ExhibitionMini PixHawk Lite Build Part 2 -Load 3.3 Firmware & Configure in Mission PlannerAuto Mode Ayarları (Mission planner arayüzüyle) (Uçuş Modları 6)(7/8) APM 2.5/2.6/3.1 - Autotrim and AutotuneComo calibrar sensor voltaje de una APM o Pixhawk - Power ModuleFlysky I6X flight modes APM Pixhawk configuration on Mission PlannerArdupilot (arduplane) #6 - ESC CalibrationPixHawk/Mission Planner/ArduCopter Build for Beginners: Common problems and solutionsPixhawk Locks Up with Retracts - Always Use BEC to Power ServosAPM to Tarot Gimbal SetupInstalling Mission PlannerMissionPlanner Intro_02 : How to do Radio CalibrationArdupilot Update APM Firmware, Compass Calibration, Battery Voltage, Airspeed XUAV Mini Talon Part 6