Flight tuning Arducopter 3.2
My method for tuning arducopter 3.2. Will work on both APM or Pixhawk.
Note: Once you've finished tuning, you can add STAB RATE P to the CH6 dial; this is good way of adjusting the flight characteristics without breaking the PID's!
Видео Flight tuning Arducopter 3.2 канала Performance UAV
Note: Once you've finished tuning, you can add STAB RATE P to the CH6 dial; this is good way of adjusting the flight characteristics without breaking the PID's!
Видео Flight tuning Arducopter 3.2 канала Performance UAV
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
(7/8) APM 2.5/2.6/3.1 - Autotrim and AutotuneQAV500 with Pixhawk Stabilize and Rate Gain TuningArducopter Tuning GuideSetting up a mapping mission with Mission Planner (Tutorial)ArduCopter V3 RC4 - Two little issue affecting Loiter and Alt HoldMINDS-i Mission Planner Step #3C Radio CalibrationArduCopter V2.9 - New AutoTrim procedure ("SaveTrim" in APM Copter V3.x)"Ardupilot:Copter V3.6.0" ReleaseПростая настройка PID-ов на Бетафлайте 4.2 для коптеров любого размераLearning ArduPilot Parameter settingsPixHawk/Mission Planner/ArduCopter Build for Beginners: Maiden Flight!Multicopter Tuning - Introduction to PID theory and how to tune your multirotorQAV250 Loiter Tuning Revisited - Tips for Tuning 250 Size Frames with Pixfalcon & APM ControllersAPM/Pixhawk Tips for Good LoiteringArduCopter - Tutorial: CH6 tuning in flight "how to" (ITA)Pixhawk AutoTune How ToDrone Follow Me Tutorial using APM and Mission PlannerTurnigy 9X Stock Firmware 6 Position Switch for 6 Flight Modes with APM 2.5 and Mission PlannerAutotune(PID's) pixhawk APM Qground control with androidSuccess in FPV part 15 - Multirotor tuning