Lathe Electronic Leadscrew Part 2: Gear Ratio Calculations
Today we're going to take a closer look at how I'm calculating the different thread and feed (virtual) gear ratios for the electronic leadscrew.
This was the most-discussed topic in the comments of the last video, so we're going to talk about it.
Firmware on GitHub:
https://github.com/clough42/electronic-leadscrew
3D Models on Thingiverse:
https://www.thingiverse.com/thing:3740612
Видео Lathe Electronic Leadscrew Part 2: Gear Ratio Calculations канала Clough42
This was the most-discussed topic in the comments of the last video, so we're going to talk about it.
Firmware on GitHub:
https://github.com/clough42/electronic-leadscrew
3D Models on Thingiverse:
https://www.thingiverse.com/thing:3740612
Видео Lathe Electronic Leadscrew Part 2: Gear Ratio Calculations канала Clough42
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Lathe Electronic Leadscrew Part 3: Control Panel and Debugging
Lathe Electronic Leadscrew Part 10: How to Program a TI LaunchPad Microcontroller
Lathe Electronic Leadscrew Part 1: Proof of Concept
Lathe Electronic Leadscrew Part 5: Mounting the Encoder and Servo on the Lathe
Making a Better Chuck Key for the Lathe
More Easy Improvements For Your Lathe and Mill
Nickel Electroplating in the Home Shop - A Shocking Way to Prevent Rust!
Ultimate Raspberry Pi 4 Rig: M.2 SSD & ICE Tower
3D Printer Dimension Tuning Revisited
Lathe Electronic Leadscrew Part 13: Assembling a Bed-Of-Nails PCB Test Fixture
Diamond Grinder Part 4: CNC Broaching a Keyway
Lathe Compound Setup for Single Point Threading...Myths and Musts
How to 3D Print Dimensionally Accurate Parts
Lathe Electronic Leadscrew Part 6: First Test Cuts!
Overspeed Error Detection | Lathe Electronic Leadscrew - Part 21
Lathe Electronic Leadscrew Part 4: Steppers and Servos and Drives (Oh My!)
Lathe VFD 3: How to Fix Noise Problems
Setting up a New PM-940M Milling Machine - Unboxing, Moving and Assembly