Thickness Planer Stand Built With Caster Wheels / DIY / Easy step by step/ Start to Finish

As you all know that my thickness planer has been on the garage floor and it was very difficult to use it and move it around. Thus, I decided to build a sturdy planer stand with caster wheels. I built mine based on my Dewalt planer and my height. It can be built in different rights and sizes based on your needs. If you have any questions please don't hesitate to write me a message in the comment section below. The cost of the materials I used in this project was less than $60

SIZES

Stand Size: L: 23" W: 23" H: 25" (without casters ). The height with casters is 28.5"
Legs: 3" X 3" X 21"
Lower Box Stretchers: 16" X 3" X 1.5"
Upper Box Stretchers: 22" X 3" X 1.5"

TOOLS
Table Saw
Thickness Planner
Cordless Drill
Sander
Brad Nailer
Measuring Tape
Rolling Paint Brush

Materials:
4 X 3 In. Polyurethane Light Duty Swivel Caster With Brake $5.99 each at Harbor Freight Tools
2 X 2-in x 8-in x 8-ft Southern Yellow Pine Lumber $12 each at Lowes
2 1/2" Brad Nails
Clear Wood Finish ( Polyurethane)
Sanding Papers
This stand fits the following thickness planers:

DEWALT Thickness Planer
WEN PL1326 15-Amp 13-Inch Spiral Benchtop Thickness Planer
CRAFTSMAN Benchtop Planer, 15-Amp (CMEW320)
JET JWP-13BT, 13-Inch Helical-Style Benchtop Planer, 120V 1PH (722130)
POWERTEC PL1252 15 Amp 2-Blade Benchtop Thickness Planer For Woodworking | 12-1/2 in.
Grizzly Industrial G0505-12-1/2" 2 HP Benchtop Planer
DEWALT DW735 13-Inch, Two Speed

Видео Thickness Planer Stand Built With Caster Wheels / DIY / Easy step by step/ Start to Finish канала Daniel Demir