How to use the LocoNet Interface (Video#64)

I recently received another batch of LocoNet interface boards from the PCB manufacturer, and of course, as more people are using the interface for their application, I am also getting more questions. In this video I am going to answer some of the more frequent ones and include some videos I received from viewers, showing how they use the LocoNet interface board.

Channel viewer videos contributed by Pierre Lambert and John Zajdler. Thank you very much!

If you like my work, please consider supporting it with a donation:
https://www.paypal.com/biz/fund?id=Y27LH47B3W354

John Zajdler's YouTube channel: Clinchfield Model Railroad N Scale
https://www.youtube.com/channel/UCh-Jg254vhrWtQtKkrSz0Cg

IoTT Stick Github Repository: https://Github.com/tanner87661/IoTTStick

Tindie page for IoTT Stick and LocoNet Interface: https://www.tindie.com/stores/tanner87661/

MyIoTT.org (landing page under construction): http://myiott.org/

LocoNet personal edition: https://www.digitrax.com/static/apps/cms/media/documents/loconet/loconetpersonaledition.pdf
Grove port system: https://wiki.seeedstudio.com/Grove_System/

Table of Content
0:00 Start
0:35 What is the function of the LocoNet interface?
2:49 Arduino Uno with LocoNet interface
3:18 Hardware setup
3:35 Setting up Arduino IDE
4:21 LocoNet example program
5:18 It works!
5:55 Understanding the code
7:35 A technical footnote: 5V I/O lines
8:20 LocoNet interface and IoTT Stick
10:47 Standalone LocoNet
12:50 Setting up a standalone LocoNet
14:20 IoTT Stick in standalone LocoNet
15:50 Node-RED on standalone LocoNet
17:45 System integration using JMRI

Видео How to use the LocoNet Interface (Video#64) канала IoTT