Plywood Shelves - A Basic Build video [Video 491]
In this video I make a set of BirchPly shelves using only a simple toolset - an entry-level plunge saw, a drill/driver and a set of cheap chisels. Enjoy!
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Videos mentioned / of interest:-
Michael Alm instagram dowels - https://www.instagram.com/reel/CaBCKvzFrnx/
Izzy Swan dowels - https://www.youtube.com/watch?v=A5QVkyOTZZY
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
DIY MFT follow-on - https://youtu.be/wyGNs1GYdCk
Dave Stanton’s Dog Stop video here - https://www.youtube.com/watch?v=GWcdI5aBB_M
Extrusion Confusion - a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
Benchdogs FenceDogs - https://youtu.be/DezSQjhcbbk
Benchdogs fence - https://youtu.be/KXBdxdeM_3Y
Parkside or Macallister Plunge Saw? - https://youtu.be/Ebm-EEXNZHE
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
All my tracksaw-related videos are in a playlist here - http://bit.ly/TracksawWorkshop
New to the MFT or MultiFunction Table? Here’s a couple of explainers:-
Festool MFT - https://youtu.be/0V-p5F7SjO4
MFT follow-on - https://youtu.be/RxcVY8ZR2fQ
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - http://bit.ly/10minute-links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, and a Benchdogs affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
Note that prices fluctuate - some have risen since I made my purchases.
Cheap chisels [similar] - https://amzn.to/3NFmCTm (US: [similar] https://amzn.to/386DYZ4)
Twist drill set from Rennie Tools; use the offer code 10MINUTEWORKSHOP for a 5% discount at Rennie Tools - https://www.rennietool.co.uk?aff=2
Corner plates - https://amzn.to/2RopWZy (US: sorry, these seem to be a non-US item, closest I can find is a regular corner bracket - https://amzn.to/2FpLX37)
Lost-tite screws - http://amzn.to/2pGnUFD (US: http://amzn.to/2pVKqa6)
Macallister plunge saw - available in the UK from B&Q stores at diy.com
10.8v drill/driver [similar] - https://amzn.to/3tQAEJ0
20mm conduit - https://www.toolstation.com/20mm-heavy-duty-pvc-round-conduit/p71029
Guiderail connector [similar] - https://tools4trade.co.uk/products/excel-universal-guide-rail-connector
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
Видео Plywood Shelves - A Basic Build video [Video 491] канала Peter Millard
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Videos mentioned / of interest:-
Michael Alm instagram dowels - https://www.instagram.com/reel/CaBCKvzFrnx/
Izzy Swan dowels - https://www.youtube.com/watch?v=A5QVkyOTZZY
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
DIY MFT follow-on - https://youtu.be/wyGNs1GYdCk
Dave Stanton’s Dog Stop video here - https://www.youtube.com/watch?v=GWcdI5aBB_M
Extrusion Confusion - a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
Benchdogs FenceDogs - https://youtu.be/DezSQjhcbbk
Benchdogs fence - https://youtu.be/KXBdxdeM_3Y
Parkside or Macallister Plunge Saw? - https://youtu.be/Ebm-EEXNZHE
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
All my tracksaw-related videos are in a playlist here - http://bit.ly/TracksawWorkshop
New to the MFT or MultiFunction Table? Here’s a couple of explainers:-
Festool MFT - https://youtu.be/0V-p5F7SjO4
MFT follow-on - https://youtu.be/RxcVY8ZR2fQ
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - http://bit.ly/10minute-links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, and a Benchdogs affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
Note that prices fluctuate - some have risen since I made my purchases.
Cheap chisels [similar] - https://amzn.to/3NFmCTm (US: [similar] https://amzn.to/386DYZ4)
Twist drill set from Rennie Tools; use the offer code 10MINUTEWORKSHOP for a 5% discount at Rennie Tools - https://www.rennietool.co.uk?aff=2
Corner plates - https://amzn.to/2RopWZy (US: sorry, these seem to be a non-US item, closest I can find is a regular corner bracket - https://amzn.to/2FpLX37)
Lost-tite screws - http://amzn.to/2pGnUFD (US: http://amzn.to/2pVKqa6)
Macallister plunge saw - available in the UK from B&Q stores at diy.com
10.8v drill/driver [similar] - https://amzn.to/3tQAEJ0
20mm conduit - https://www.toolstation.com/20mm-heavy-duty-pvc-round-conduit/p71029
Guiderail connector [similar] - https://tools4trade.co.uk/products/excel-universal-guide-rail-connector
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
Видео Plywood Shelves - A Basic Build video [Video 491] канала Peter Millard
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
My 5 Worst Buys! [video 484]How to Hang Pictures Straight and LevelDowel Jig Basics [video 441]Backyard, DIY MFT on a Budget [video 490]Breathe Clean Air - Workshop air filter [video 464]Aldi Ferrex 10” Bandsaw 12 months on [video 475]Portable & Affordable Workbench for Small SpacesA plywood square that's accurate, cheap and easy to make. [video 415]Tricky Tracksaw Cuts [video 460]Cabinetry Basics Part 2 - Screws or Nails? [#Ad][video 436]Pocket-money Rail Square [video 417][Gifted**]3 Easy Wins - Soundproofing a Workshop Wall [video 469]How to Build Easy Workshop Shelves from 1 Sheet of PlyUltralight Portable Bench [video 434 ][Gifted/Ad**]My Cheap Nailer and Compressor [video 463]Basic Plywood Boxes [video 445]BIG NEWS - Change is in the air!!!Peanut 2 or Lamello Tenso? [**Gifted/Ad][video 450]Flat-Pack CNC Loose Tenon Jig [video 482]