Flat-Pack CNC Loose Tenon Jig [video 482]

In this video it is my pleasure to - finally - introduce the 10 Minute Workshop Loose Tenon Jig, and rather than drone on about it, I put a simple carcass together using nothing but the loose tenon jig and the Trend T18s cordless trim router [gifted] with a 5mm carbide spiral upcut bit. Enjoy.

Loose tenon jigs are now available in my Etsy store at www.10minute.shop NB shipping and handling charges have increased since this video was made, and are stated clearly on the store.
+++++++++

Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember

Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop

Support the channel directly - http://bit.ly/donate_to_10minuteworkshop

+++++++++

Other videos of interest:-

Loose Tenon Basics - https://youtu.be/t86QGUn7dAI

Dowel Jig Basics - https://youtu.be/zTj_hiEVfvw

10 years of Domino - https://youtu.be/7oxd2Qnvyw0

+++++++++

If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.

My Etsy - http://bit.ly/10minuteShop

Amazon store - http://bit.ly/10minuteworkshop

My ‘social’ links & contacts in one place - http://bit.ly/10minute-links

Full list of ‘Stuff I use’ at http://bit.ly/stuff_I_use

Connect with me on twitter @10minuteshop

Connect with me on Instagram @10minuteworkshop

+++++++

Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.

Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.

Amazon UK - https://www.amazon.co.uk/shop/petermillard1

eBay UK - http://bit.ly/Buy_eBay_UK

++++++++

Used/featured in this video:-

10 Minute Workshop Loose Tenon Jig (register for availability) - https://bit.ly/10MWLTJ_register

Trend T18s cordless router - https://amzn.to/3IRi7CO (US: nope)

Festool Midi bluetooth extractor - https://amzn.to/3q29VXI (US: 🤷‍♂️)

Festool bluetooth remote - https://amzn.to/3s4yHcB (US: 🤷‍♂️)

1/4” shank x 5mm Carbide spiral upcut bit - https://www.rennietool.co.uk/collections/solid-carbide-router-bits/products/solid-carbide-2-flute-up-cut-spiral-router-bits-on-a-1-4-shank?variant=32477353640023&aff=2

Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)

Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)

Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)

Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)

Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)

Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)

Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)

Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)

Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)

Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA

Other useful gear:-

Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)

Festool Domino assortment - http://amzn.to/2piZjHa (US: http://amzn.to/2pGv1Lx)

Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)

Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)

Mirock square - https://etsy.me/2MC0RT

Mirock 500mm T-ruler - https://etsy.me/365P0KE

+++++++++

Видео Flat-Pack CNC Loose Tenon Jig [video 482] канала Peter Millard