Transform Your Cutting Boards: The Magic 4:1 Mix You Need to Know!

Board butter or board conditioner is essential for maintaining wooden cutting boards, keeping them moisturized and protected. Your 4:1 mixture of mineral oil to beeswax (4 pounds of mineral oil to every pound of beeswax) is a popular and effective recipe. Here's a step-by-step guide to making it:

Ingredients:
4 lbs of food-grade mineral oil
1 lb of beeswax

Equipment:
Crock Pot
Measuring scale
Stirring utensil
Containers for storage or metal tins

Instructions:
Prepare the crock pot
Start by heating up the mineral oil in the crock pot.

Melt the Beeswax:
Weigh out 1 pound of beeswax and add it to the crock pot with the oil slowly. Stir occasionally until fully melted. Beeswax has a high melting point, so it might take a little while.

Combine Thoroughly:
Continue heating and stirring the mixture until the beeswax and mineral oil are fully combined. The mixture should be smooth and uniform.

Cool and Store:
Carefully pour the hot mixture into your storage containers. Allow the board butter to cool and solidify completely before sealing the containers.

Application:
To use the board butter, apply a small amount to the wooden surface with a clean cloth or paper towel. Rub it in thoroughly, let it sit for several hours or overnight, and then wipe off any excess.

Tips:
Safety First: Always be cautious when working with hot materials to avoid burns.
Storage: Store the finished board butter in a cool, dry place. Properly stored, it can last for a long time.

Consistency: If you prefer a softer or harder consistency, you can adjust the ratio of mineral oil to beeswax slightly.

This DIY board butter will help keep your wooden cutting boards, butcher blocks, and other wooden kitchen utensils in great condition, extending their lifespan and maintaining their appearance.

Видео Transform Your Cutting Boards: The Magic 4:1 Mix You Need to Know! канала Hilltop Sierra