K40 upgrade guide - Cohesion3D LaserBoard + Lightburn
I purchased my Chinese laser cutter with the underwhelming M2 Nano mainboard. In this video, I install a Cohesion3D LaserBoard controller to use with the software Lightburn. This combination is incredibly powerful and efficient. It makes using the laser a breeze.
My installation was very easy. The documentation matched my setup and the board was plug and play. I introduced my own extra work by electing to relocate the controller location, which involved extending wiring. On a smaller machine like a K40, this wouldn't be necessary and the whole thing would be done in 10 minutes.
When using this board, a g-code only Lightburn license is required. Lightburn has a full featured 30 day trial for you to test the software and make an informed purchase. I highly recommend trialling it out.
In a future video I will showcase the Lightburn camera and give some tips on how to get the best out of this package.
Cohesion3D LaserBoard: https://cohesion3d.com/shop/controllers/cohesion3d-laserboard/
Lightburn software: https://lightburnsoftware.com/
C3D LaserBoard installation docs: https://forum.cohesion3d.com/t/k40-with-m2nano-cohesion3d-laserboard-installation/88
C3D air assist documentation: https://forum.cohesion3d.com/t/laserboard-air-assist-control/101
High speed cluster firmware: https://forum.cohesion3d.com/t/improved-raster-speed-firmware-update-for-cohesion3d-boards/850
Smoothieware laser cutter configuration guide: http://smoothieware.org/laser-cutter-guide
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
Видео K40 upgrade guide - Cohesion3D LaserBoard + Lightburn канала Teaching Tech
My installation was very easy. The documentation matched my setup and the board was plug and play. I introduced my own extra work by electing to relocate the controller location, which involved extending wiring. On a smaller machine like a K40, this wouldn't be necessary and the whole thing would be done in 10 minutes.
When using this board, a g-code only Lightburn license is required. Lightburn has a full featured 30 day trial for you to test the software and make an informed purchase. I highly recommend trialling it out.
In a future video I will showcase the Lightburn camera and give some tips on how to get the best out of this package.
Cohesion3D LaserBoard: https://cohesion3d.com/shop/controllers/cohesion3d-laserboard/
Lightburn software: https://lightburnsoftware.com/
C3D LaserBoard installation docs: https://forum.cohesion3d.com/t/k40-with-m2nano-cohesion3d-laserboard-installation/88
C3D air assist documentation: https://forum.cohesion3d.com/t/laserboard-air-assist-control/101
High speed cluster firmware: https://forum.cohesion3d.com/t/improved-raster-speed-firmware-update-for-cohesion3d-boards/850
Smoothieware laser cutter configuration guide: http://smoothieware.org/laser-cutter-guide
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
Видео K40 upgrade guide - Cohesion3D LaserBoard + Lightburn канала Teaching Tech
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
K40/Chinese CO2 laser cutter/engraver buyer’s guideLaser cutting 3D printer - Endurance Laser 10 watt honest review - Update in pinned post🆕K40 40 Watt Laser Cutter- EVERY Mod & Setup I have Done in ONE Video! 🎉🛠K40 Cohesion 3D / LightBurn Installation- Part 1Upgrading Stock K40 Head With LightObject Air Assist HeadK40 Laser upgraded control panel, wiring Part 1.Lightburn Anleitung & Tutorial in Deutsch | Grundlagen für Absolute Beginner mit Laser CutterFirst Test Of My LightBurn CameraThe REAL cost of a Chinese 50W Laser from Ebay2019 K40 laser upgrades, Manual Z axis build.My Heavily Modified K40 C02 Laser | $400 Ebay C02 Laser UpgradesHow To Install The Cohesion3D LaserBoard Into Your K40 C02 LaserK40 Laser control panel best upgrade under $10.Lightburn Camera Calibration For Laser Cutters And EngraversK40 Laser Cutter & Engraver - What Do You Really Need To Get Started?Chinese K40 Laser Safety / What is true?The Short K40 Laser Alignment Video is Here!K40 Chinese Laser Cutter Hacks & Mods Pt. 1 - Improved Extraction | Octavio.MakesK40 Tips and Tricks. Simple Time saving HacksHow To Install A Milliamp Gauge In A Chinese CO2 Laser