K40 Cohesion 3D / LightBurn Installation- Part 1
In part one of this series, I will be upgrading the generic K40 Laser with a Cohesion3D Laserboard. It’s a quick and easy process.
In future episodes, I will cover installing firmware onto the board, and setting up Lightburn software to run it.
This upgrade is sponsored by Cohesion3d and Lightburn.
*********************************************************
To follow along with the installation, I’d suggest starting at:
https://cohesion3d.com/start/
Cohesion3d Support Forums can be found here:
https://forum.cohesion3d.com
*********************************************************
To learn more about the Cohesion3D Laser board, check out:
https://cohesion3d.com/shop/controllers/cohesion3d-laserboard/
If you are curious about the LightBurn software, check out:
https://lightburnsoftware.com
And if you are interested in the K40 laser or wish to pick one up, they are available on eBay, Amazon or any of the other usual suspects…
Note: the ones with the “Analog” control panel are recommended over the ones with the “New Digital” control panel.
Example from Amazon:
https://amzn.to/2XvdCJw
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
https://www.amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: https://amzn.to/2RCmnv9
MatterHackers: https://goo.gl/JZLovC
Gear Best: https://goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: https://www.patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
https://soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
https://www.facebook.com/Practical3D/
Видео K40 Cohesion 3D / LightBurn Installation- Part 1 канала Practical Printing
In future episodes, I will cover installing firmware onto the board, and setting up Lightburn software to run it.
This upgrade is sponsored by Cohesion3d and Lightburn.
*********************************************************
To follow along with the installation, I’d suggest starting at:
https://cohesion3d.com/start/
Cohesion3d Support Forums can be found here:
https://forum.cohesion3d.com
*********************************************************
To learn more about the Cohesion3D Laser board, check out:
https://cohesion3d.com/shop/controllers/cohesion3d-laserboard/
If you are curious about the LightBurn software, check out:
https://lightburnsoftware.com
And if you are interested in the K40 laser or wish to pick one up, they are available on eBay, Amazon or any of the other usual suspects…
Note: the ones with the “Analog” control panel are recommended over the ones with the “New Digital” control panel.
Example from Amazon:
https://amzn.to/2XvdCJw
*********************************************************
If you like the channel, please be sure to subscribe and leave a thumbs up!
If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures!
https://www.amazon.com/shop/crussty
You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going:
Amazon US: http://amzn.to/2gQC6Wg
Amazon UK: https://amzn.to/2RCmnv9
MatterHackers: https://goo.gl/JZLovC
Gear Best: https://goo.gl/ni2ZCi
Practical Printing is now on Patreon!
If you'd like to support the channel, please check out: https://www.patreon.com/pp3d
Channel Intro music by Joseph Cervantes. You can find more of his great music here:
https://soundcloud.com/joseph-george-cervantes
Instagram:airbum92
Additional Royalty Free Music from:
http://www.bensound.com/royalty-free-music
I am now online at www.practical-printing.com
Find me on Twitter @crussty
Also be sure to follow Practical3D on FaceBook for all the latest updates:
https://www.facebook.com/Practical3D/
Видео K40 Cohesion 3D / LightBurn Installation- Part 1 канала Practical Printing
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
K40 Cohesion 3D / LightBurn Firmware Installation- Part 2How To Install The Cohesion3D LaserBoard Into Your K40 C02 LaserThe Big Reveal! The Mods Are Done! (Well, Almost...)K40 Laser control panel best upgrade under $10.K40 laser cutting and focus point2019 K40 laser upgrades, Manual Z axis build.How To Install A Milliamp Gauge In A Chinese CO2 LaserK40 upgrade guide - Cohesion3D LaserBoard + LightburnK40 laser- Adjustable lense fitting and setupK40 Tips and Tricks. Simple Time saving HacksUltimate K40 C02 Laser Upgrade! Cohesion 3D LaserBoard OverviewFranken-40 - Highly Modified K-40 Laser introduction (previous version)EASY Upgrades Make the K40 a BUDGET Laser Cutter BEAST! 🔥K40 Cohesion 3D / LightBurn Connectivity- Part 3eBay K40 CO2 Laser - Adapting for Use with LightBurn on the Cheap!Upgrading Stock K40 Head With LightObject Air Assist HeadCrazy K40 Laser upgrade to 130W Laser Tube Part 2 - Fire - Fire - FireCheap K40 Manual Z Bed - Full Build - Part 3K40 CO2 Laser stupid MEGA powerupgrade to 130 Watt LASERTUBEAdding a Camera to your Laser