Hublot Classic Fusion Ceramic Blue 42mm 542.CM.7170.LR Functions & Care

Shop the Hublot collection: https://goo.gl/pt93GT

Greetings. I'm Tim of Govberg, and welcome to the world of Hublot. Today, I'll be your guide for the proper usage, care, and maintenance of your Hublot classic fusion ceramic Blue 42 millimeter. Now this an automatic winding time piece by means of case back winding mass. The rotor converts the energy of the wrist into main spring barrel wind but, should you wish to manually wind the watch, take the crown in its first position flush to the case and turn it 20 to 30 turns in a clock-wise direction.

Now this should be sufficient to start the movement. At this point you can set the date, set the time, wear the watch, it will continue to wind itself. But if you wish to continue to wind up to the maximum rated power reserve of 42 hours, simply continue turning. Listen for the subtle click or tick of the bridal style main spring slipping. You cannot accidentally overwind the watch, it slips to relieve any excess strain, so listen for that audible sign that your watch is fully energized.

Once you've wound your watch, you can use two subsidiary functions to set it more precisely. The first is stop seconds, and you see it engaged here. Stop seconds, when you withdraw the crown and halt the balance, arrests the movements of the hands. Set against a reference time such as an online atomic clock, such as that maintained by the U.S. Naval Observatory. Set the watch to the same hour as the atomic clock and the next nearest minute. Wait for the reference time to catch up to the time you've set down to the second, and push the crown in when they coincide. Now you've synchronized your reference time.

The watch also features a quick set date. One [inaudible 00:01:42] out from flush to the case, you actuate the quick set, which allows you to turn the crown counter-clockwise and rapidly cycle the date should the watch run down or encounter and irregular length month. It is important to remember that this function should never be used during the hours between 8 PM and 3 AM as this the period when the watch is automatically jumping its date. Take care never to use the quick set during that period, and if you must roll the watch through the date change during that period, do so manually by turning the hands through the date change.

Now there are three primary areas of hazard with respect to the handling of your watch, mindful of the movement's longevity. But there's one area with the respect to the longevity of the exterior that needs to be discussed. The timepiece is crafted of high tech Black ceramic, a material Hublot uses to avoid the marks of wear and tear, conventional scratches and scuffs that prematurely age metal watches.

The ceramic is effectively as hard as the sapphire crystal meaning only diamond can routinely scratch it. However, under certain extreme circumstances, vicious blows against metal, concrete, or stone may fracture the ceramic, so always treat the ceramic case as you would the crystal over the dial. Highly scratch resistant, but not immune to blunt force trauma against solid objects.

Magnetism is unseen but ubiquitous. It's found in proximity to MRI equipment, high-powered speakers, subwoofers, wiring looms, the closures of wallets, purses and refrigerator doors. Keep the watch remote from these sources as a magnetized watch can run erratically fast or slow because the hair spring at the center of the balance, the watch's heartbeat, effectively, has becomes altered by the magnetism. If you suspect, due to erratic running, that your watch has become magnetized, take it to an Hublot authorized service center where specialized equipment is available to quickly and easily de-magnetize the watch.

Finally, every fine mechanical watch requires a comprehensive overhaul every three to five years. This will follow the exterior reconditioning of the watch, replacement of a worn strap, restoration of water resistance as well as cleaning, oiling, and re-regulation of the caliber. The total condition of your watch should be checked every year when the watch goes in for the annual water test. If necessary, service exclusively with an Hublot authorized service center or the factory as the agencies solely have the trained personnel, specialized tools, and Hublot original factory replacement parts to protect the value of your classic fusion as both instrument and as investment. Moreover, only these agency are able to back all labor and parts invested with an Hublot factory service warranty. Finally, call, text or email our experts atGovbergWatches.com and they'll be happy to walk you through every phase of the usage and the care of this or any Hublot fine time piece.

Видео Hublot Classic Fusion Ceramic Blue 42mm 542.CM.7170.LR Functions & Care канала Govberg Jewelers