OM617 Performance Series: Injection Pump & Fuel Filter Modification, Idle Adjust, ALDA, & Fuel Lines

For injection pump upgrades, there is only one viable option: dieselmeken.se
dieselmeken@msn.com
I DO NOT recommend getting a pump from their vendors or anyone else.

Need a turbo to go along with your modified pump? Need a turbo for your stock pump? I offer the best turbo options for this engine: https://www.doomsdaydiesel.net/turbochargers-1
ALDA Delete Instructions: https://www.youtube.com/watch?v=kTCJpMDZ8Cc&t=3s

ALDA Explanation Correction: The MW Pump's ALDA begins to add fuel at 0.3 BAR, and fully opens by 0.7 BAR. With the 7.5mm pump, you'll have enough fuel at 0.7 BAR for 1.5 BAR's worth of boost. This means you should plan to run a turbo with a wastegate set no lower than 1.5 BAR so you can burn all of the fuel.

Loctite 542 would be best suited for the fuel filter adapter, but 243 also works.

This video is LOADED with info! Save yourself the hours of research that it takes to find all this info by watching this 50 minute video. I give insights to the 7.5mm injection pump that I gained from Dieselmeken, themselves.

ALDA Delete: https://www.doomsdaydiesel.net/product-page/alda-delete

Fuel Filter Adapter: https://www.doomsdaydiesel.net/product-page/cat-1r-0750-fuel-filter-adapter-kit

Cohline Line available here: https://www.doomsdaydiesel.net/product-page/om617-cohline-fuel-alda-line-fittings

Fuel filter bolt o-rings: 003-997-58-48-INT
000-997-00-48-M22

0:00 Intro
1:47 Pump Options
2:35 Pump Differences
3:06 Modification-Shop Options
7:33 Idle Adjustment
8:54 ALDA Explanation (see below for correction)
11:41 Pump Removal
15:14 Shipping a Pump
24:30 Making Cohline Fuel Lines
32:42 Fuel Filter O-Rings
35:15 Fuel Filter Donaldson/CAT Adapter Installation
36:51 Pump Installation
44:31 Pump Timing (Drip Timing)
48:32 ALDA Adjustment

Видео OM617 Performance Series: Injection Pump & Fuel Filter Modification, Idle Adjust, ALDA, & Fuel Lines канала Doomsday Diesel