How To Make A Beaded Layering Necklace

In “How To Make A Beaded Layering Necklace” we'll show you how to make a multi-strand necklace. We’ll show how to create the three strands of beads, how to add a pendant, and how to combine the strands to finish the ends and add the clasp.

You can see the complete step by step written instructions for this project on our blog ► https://runningwithsisters.com/beaded-layering-necklace/

Please subscribe to our YouTube Channel ► https://www.youtube.com/user/oneilsisters
Check out our blog. It has all the how-tos. ► https://runningwithsisters.com/
Subscribe to our newsletter ► https://runningwithsisters.com/subscribe-to-our-newsletter/
See our kits for sale ► https://runningwithsisters.com/welcome-to-our-shop/

Let’s connect!
Facebook ► https://www.facebook.com/TheONeilSisters
Instagram ► https://www.instagram.com/oneilsisters/
Pinterest ► https://www.pinterest.com/oneilsisters/

Chapters:
0:00 Title
0:09 Tools & Materials
1:21 Beading Pearl Strand
4:25 Sliding On The Pendant
6:02 Beading Aqua Strand
7:12 Beading Light Topaz Strand
8:43 Finishing The Ends
20:41 How To Use A Jump Ring Opener

Here's the how-to:
How To Make A Beaded Layering Necklace
by Jennifer and Kitty O'Neil
Running With Sisters

Materials & Tools
16" Faceted round crystal beads, fire-polished aqua, 3mm
16" Faceted crystal rondelles, light topaz, 2mmx3mm
16" Fresh water pearls, 3mm to 5mm
1 Teardrop bezel-set pendant, blue chalcedony & gold
4 Clamshell bead tips, gold
6 Crimp beads Size #0, gold
2 Jump rings, 6mm, gold
1 Lobster clasp, gold
19-Strand bead stringing wire, gold
Chain-nose pliers ► https://amzn.to/3q8M7k4
Wire cutters ► https://amzn.to/3aQXV3X
Bead Scoop ► https://amzn.to/37J6xJh
Jump ring opener
Masking tape
Scissors
Ruler

Steps
1. Cut an 18" length of bead-stringing wire. Bead the freshwater pearl strand first. To do this, scoop some pearls into the palm of your hand. Then “fish” the pearls onto the bead-stringing wire by tipping each pearl onto the end of the wire. Measure the beaded section of bead stringing wire periodically until you have 8" of pearls on the strand.
2. Next, slide on the pendant. Then feed on another 8" of freshwater pearls so the pendant hangs in the center of the strand. Fold a piece of masking tape on the end of that wire. Set the beaded pearl strand aside.
3. Cut another 18" length of bead-stringing wire and fold a piece of masking tape over one end. Bead the strand with aqua crystal beads. Bead and measure until you have 16" of the aqua crystals on the bead stringing wire. Put a piece of masking tape on the end of the crystal strand and set the strand aside.
4. To bead the last strand, cut 18" of bead-stringing wire and put masking tape on one end. Feed on 16" of the light topaz crystals, then finish with masking tape and set aside with the two other strands.
5. To finish the ends of the necklace, start with the aqua crystal stand. Remove the masking tape from one end of the wire and feed it up through the bottom of a clamshell bead tip. Slide on a crimp bead and flatten it onto the wire with the chain-nose pliers. Use the wire cutters to trim the wire next to the flattened crimp. Don’t close the clamshell yet!
6. Remove the masking tape from one end of the other crystal strand. Feed the end of the wire up into the same clamshell bead tip. Slide on a crimp bead and flatten it onto the wire with the chain-nose pliers. Trim the wire. Use the chain-nose pliers to gently press the clamshell closed over the two flattened crimps.
7. Slide the beads to the finished end. Remove tape and slide end of wire up into a clamshell bead tip. Slide a crimp bead onto the wire. Use the tip of the chain-nose pliers to flatten the crimp inside the clamshell. Trim the wire close to the crimp. Remove the tape the other crystal strand. Feed the wire up into the same clamshell bead tip, then slide on a crimp bead. Flatten the crimp inside the clamshell with the tip of the pliers. Trim the wire. Gently press the clamshell closed over the two crimps. Repeat to finish the ends of the freshwater pearl strand.
8. Open a jump ring using the jump ring opener by fitting the jump ring into a slit in the ring and rotating to open the jump ring. Slide the clamshell bead tip from the pearl strand and clamshell bead tip from the double crystal strand onto the open jump ring. Then slide on the lobster clasp and close the jump ring. Open the other jump ring with the opener. Slide on the other clamshell bead tip from the pearl strand and from the double crystal strand. Close jump ring.

If you like this video, you may also like these jewelry making how-to videos:
Multi-Strand Necklace ► https://youtu.be/e2v6n_KuTss
Easy Beaded Necklace ► https://youtu.be/R2f19afVzHE
Floating Bead Necklace ► https://youtu.be/DUm-qs3bK5M
Dangling Bead Necklace ► https://youtu.be/3XUfJ5jdarM
Endless Beaded Necklace ► https://youtu.be/y_2IagX_yos
Long Beaded Necklace ► https://youtu.be/7sWCxb7UiS8

#oneilsisters #jewelrymaking #makeanecklace

Видео How To Make A Beaded Layering Necklace канала The O'Neil Sisters