S10 Chassis swap for 51 Chevy Truck: Locating the Cab Mounts 11-16-2013
Check out my Build Tread on the The 1947 - 1959 Chevrolet & GMC Pickups Message Board at www.67-72chevytucks.com Here is the link:
http://67-72chevytrucks.com/vboard/showthread.php?t=415418
I've received a lot of questions regarding how I located my cab mounts.I hope this little video answers some of your questions. This is only to be used as a reference. It is totally up to you to decide exactly where to mount them. The cab mounts are made of 1/4 in.4X4 square tubing. I think 3/16 would have been plenty thick but that's all they had at the place I get my supplies.
Видео S10 Chassis swap for 51 Chevy Truck: Locating the Cab Mounts 11-16-2013 канала Bartman's Garage
http://67-72chevytrucks.com/vboard/showthread.php?t=415418
I've received a lot of questions regarding how I located my cab mounts.I hope this little video answers some of your questions. This is only to be used as a reference. It is totally up to you to decide exactly where to mount them. The cab mounts are made of 1/4 in.4X4 square tubing. I think 3/16 would have been plenty thick but that's all they had at the place I get my supplies.
Видео S10 Chassis swap for 51 Chevy Truck: Locating the Cab Mounts 11-16-2013 канала Bartman's Garage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
1947 Chevy S10 Frame Conversion Part 1
Rebuilding Shorty a 53 chevy truck sitting on a 2000 gmc 4.3
Installing Chevy s10 Clip into a 1950 GMC pickup
Prep for the Code 504 S10 kit going under the 1953 Chevy Truck! Lucore Automotive
S10 chassis shortening
Slamming The GMC On Custom Air-Ride | 1952 GMC 3100 Restoration Part 3 | Turnin Rust
1950 GMC steering column to S10 steering box how-to, and we use the stock Silverado fuse box
51 Chevy Truck Cab Mounts
Making a step notch for a 51 Chevy pickup from scratch.
47-54/55.1 Chevy Shortbed S-10 Conversion Kit Install: Segment 1
Extending / Reducing an S10 Frame
Swapping Over The 5.3 LS | 1952 GMC 3100 Restoration Part 2 | Turnin Rust
CODE 504 BOLT OWN KIT INSTALL "EP" 8
Lowering a 1947-1953 Chevy truck without using air bags or lowering blocks (and still have a bed)
LONESTAR Throwdown 2021!
Code 504 Frame Swap on the '53 Chevy, engine relocation, and fitting the cab! From Lucore Automotive
50 Chevy to s10 frame pt2
FULL REBUILD: 1949 Chevy 3100 Truck with a Hopped Up Straight Six and Patina Paint
52 GMC Rear End Swap (Torque Tube to S10 swap 47-54 Chevy/GMC Truck)
"A Boy and His Truck" This is 1951 Chevy truck going on a 1995 Chevy Caprice frame