Finish Your Kitchen Remodel Punch List | Ask This Old House

In this video, Ask This Old House general contractor Tom Silva helps a homeowner wrap up a few small projects towards the end of her kitchen renovation.

SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse.

Projects for Your Remodel Punch List
Adding a toe kick and repairing a door are easy items to knock out on your remodel punch list. This Old House General Contractor Tom Silva walks through the steps to get these projects done.

Project #1: How to Add a Toe kick

Time: 3 to 4 hours
Cost: $60 and up
Skill Level: Moderate

Tools:
Pull saw [https://amzn.to/3eyHwmA]
Coping saw [https://amzn.to/3nsnEpi]
Block plane [https://amzn.to/3dX505M]
Sliding compound miter saw [https://amzn.to/32UM7Ko]
Drill [https://amzn.to/3nw3v1A]
Brad nailer [https://amzn.to/3nyLeAS]
Putty knife [https://amzn.to/3t662Ax]

Shopping List:
PVC trim boards [https://bit.ly/3b4Z9cX]
PVC glue [https://bit.ly/3ezGPcG]
White spray paint [https://amzn.to/3u2muDo]
Screws [https://amzn.to/3vvvukz]
Finish nails [https://amzn.to/3e1Rjmg]
Spackle [https://amzn.to/3xxwfM0]

To finish the toe kick, Tom Silva opts for PVC boards as they are waterproof, easy to clean, and easier to cut than tile to match uneven floors. He goes through the process of cutting and installing the PVC for all of the cabinets.

Project #2: Door Repair

Time: 1 hour
Cost: $0 if you have the tools
Skill Level: Beginner

Tools:
Circular saw [https://amzn.to/3e0qBKF]
Block plane [https://amzn.to/3dX505M]
Sawhorses [https://amzn.to/32UWca3]

The homeowner re-tiled her floors and since then, the basement door gets stuck on the tile and doesn’t open fully. Tom Silva tackles the door by taking it off the hinges and demonstrating how to cut the bottom off to adjust to the new floor height from the tile.

Where to find it?
To add trim to the toe kick underneath the kitchen cabinets, Tom used 1x4” PVC trim boards [https://bit.ly/3b4Z9cX], which are manufactured by AZEK Building Products [https://azekexteriors.com/]. To secure the miters together, Tom also used a PVC glue that is manufactured by AZEK [https://bit.ly/3ezGPcG].

To cut the boards to size and make the miter cuts, Tom used a Kapex KS120 sliding compound miter saw [https://bit.ly/3gIWKIt], which is all manufactured by Festool [www.festoolusa.com].

To trim the door down to size, Tom used a TS 55 circular saw [https://bit.ly/3u3Ppqz], which is also manufactured by Festool [www.festoolusa.com].

The other tools and materials Tom used for this project, including the spackle, finish nails and screws, can all be found at home centers.

Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: https://bit.ly/2GPiYbH

Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: https://www.thisoldhouse.com/pages/streaming-app

About Ask This Old House TV:
From the makers of This Old House, America’s first and most trusted home improvement show, Ask This Old House answers the steady stream of home improvement questions asked by viewers across the United States. Covering topics from landscaping to electrical to HVAC and plumbing to painting and more. Ask This Old House features the experts from This Old House, including general contractor Tom Silva, plumbing and heating expert Richard Trethewey, landscape contractor Jenn Nawada, master carpenter Norm Abram, and host Kevin O’Connor. Ask This Old House helps you protect and preserve your greatest investment—your home.

Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/AskTOHIG

Finish Your Kitchen Remodel Punch List | Ask This Old House
https://www.youtube.com/user/thisoldhouse/

Видео Finish Your Kitchen Remodel Punch List | Ask This Old House канала This Old House