CBI Front Hybrid Bumper Install

In this video, we show you how to install a CBI Off Road Fab Front Hybrid Bumper on a 3rd Generation Toyota 4runner. The CBI bumper was built to be plug and play for the years 1999-2002 so there’s no needed cutting or welding to install the bumper. For years 1996-1998, you have to cut off the existing plates at the end of the frame rails and weld on plates provided by CBI. If you have a 1999-2002, you can obviously skip the parts of the video that cover the cutting of the plates and the welding of the replacement plates.

We show you everything you need to do to make this installation successful including addressing the wiring of the turn signal lights and replacing the turn signal relay to fix the hyper blinking that happens when you use LED lights.

**The welding was done at "One Off Customs" in Morgan Hill, CA
http://www.oneoffcustoms.com/
Wes prefers taking on big projects but he does entertain smaller jobs like this when he has the time. If you're in the California Bay Area and need some welding, custom fabrication or a big project like a complete vehicle restoration or custom build, give Wes a call. (408) 802-3299
**PARTS**
CBI Front Bumper
http://www.cbioffroadfab.com/products/3rd-gen-toyota-4runner/3rd-gen-front-hybrid-warn-m8000/

Pair of D Ring Shackles
https://amzn.to/2GCPkob

Pair of D Ring Isolators
https://amzn.to/2WOM7Hs

Extra Isolators to make the shackles fit tighter
https://amzn.to/2DnKTKF

LED Turn Signal Relay
https://amzn.to/2WMIUIy

Waterproof Electrical Connectors
https://www.amazon.com/gp/product/B01DILSJ0A/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Shrink Butt Connectors
https://amzn.to/2MVhmMG
**HELPFUL TOOLS**
**If you don't see a tool you need listed below, here's a master copy of Timmy's suggested tools:
https://docs.google.com/document/d/1TV08fumiXvyrb6yBMPl0gsp7UlcQEa9lHtqFNiZWOVI/edit?usp=sharing

*JIS Screwdriver - (used to remove turn signal lens screws and screw for heater vent tube)
https://amzn.to/31nlP0f


*Milwaukee Mi12 Cordless Ratchet - (used for several fasteners for this job. This cordless ratchet is a time saver because it speeds up the removal and installation of fasteners) https://amzn.to/2utRZsE


*Milwaukee M12 Batteries (2 Pack)
https://amzn.to/2uoQlZs


*Milwaukee M12 High Capacity Battery
https://amzn.to/2HEFTpu


*Milwaukee M12 Battery Charger
https://amzn.to/2uo2o9x


*3/8” Drive Regular Extension Set
https://amzn.to/2OehCao


*3/8" Drive 6 Point Metric Standard Socket Set
https://amzn.to/32WIh0M


*Dewalt 3/8" Impact Gun - (nice compact and powerful gun. used to remove some of the OEM bumper bolts) https://amzn.to/2uqWnZy


*Dewalt Batteries
https://amzn.to/2urcx59


*Dewalt Battery Charger
https://amzn.to/2Ud8RlY


*3/8" Drive Deep Impact Socket Set
https://amzn.to/2ZWjY6C


*3/8” Drive Shallow Impact Socket Set
https://amzn.to/2KnoYaq


*3/8" Drive Regular Impact Extension Set
https://amzn.to/31AoCmC

*Harbor Freight 2000 lb Transmission Jack

- (works really well and is affordable. used to support bumper while we got bolts started on either side)
https://www.harborfreight.com/2000-lbs-low-profile-transmission-jack-60240.html..

Milwaukee M12 HackZall - (used to cut the frame end plates off)
https://amzn.to/2TFNIO6

Diablo Demon Carbide Tipped Blade - (great blades that cut well)
https://amzn.to/2tl90Ff

*Ball Pein Hammer - (used to knock off frame end plates)
https://amzn.to/2W5eHV5


*Mayhew 5 Piece Prybar Set - (used to bend the end plates to get a better purchase with the reciprocating saw blade. This is a nice complete set)
https://amzn.to/2Ob8THw


*Dewalt Angle Grinder/Cutter - (used to smooth out old welds in preparation to get the frame plates welded on) https://amzn.to/2LtTJvg


*Black Spray Paint - (used to paint the frame plates and frame ends to prevent corrosion)
https://amzn.to/2Doq5CY

Circuit Tester (Test Light) - (to test which turn signal wire had power and which was the ground)
https://amzn.to/2UMLFrB

Heat Gun - (to shrink butt connectors)
https://amzn.to/2WSHPPl

Klein Wire Strippers/Cutters - ( to strip wires to wire the LED turn signal lights)
https://amzn.to/2TzblaV

Terminal Crimper Set - (to crimp the shrink butt connectors)
https://amzn.to/2Dl5MpF

*Wire Cutters - ( to cut wires and wire bundle sheathing)
https://amzn.to/2RLrTi1


*Stubby 3/8" Ratchet - (nice ratchet when you don't require a lot of leverage and great for when space is limited to turn a ratchet) https://amzn.to/2upFKNN


*1/4" and 3/8" Flex Head Ratchet Set - (super functional ratchets that will make wrenching much easier for you. used the 1/4" ratchet to remove fuse box)
https://amzn.to/2ql8nNA


*1/4” Drive 6 Point Standard Metric Socket Set
https://amzn.to/2QIU7te


*1/4” Drive Regular Extension Set
https://amzn.to/2O9nl2x


*Impact Swivel Set (1/4”, 3/8”, 1/2”) - this is a nice set that has all the sizes you'd need
https://amzn.to/33fCPGp

**As Amazon Associates we earn from qualifying purchases.

Видео CBI Front Hybrid Bumper Install канала Timmy The Toolman