Never ending issues with my BendPak HD-9XW four post lift.
The shenanigans never end with my Bendpak HD-9XW four post lift.
My lift was installed in the beginning of October, and it's now the middle of January, and I am still dealing with issues that originated from the install
As many of you know, that have watched the install video, my "qualified" technicians were not actually the most qualified.
I've gone back and forth with the local distributor, as well as going back and forth with the corporate office, both of which do not bring any resolution to the issues I'm dealing with.
Since the pneumatic lock system is not operating correctly, I have to wedge for screwdrivers into each of the four locking mechanisms, at each of the columns.
While this takes a lot of time, and is frustrating to have to do, it's also very unsafe.
By wedging the locks open, with screwdrivers, I'm removing the safety feature of the locks. If there was to be a pneumatic or cable failure, the locks would not be able to engage, thus avoiding a catastrophic failure while the car is on the lift, or while the lift is in operation.
Instagram:
https://www.instagram.com/r_wichman?r=nametag
Facebook:
https://www.facebook.com/RobertWichmanJr
To save on workout supplements.
http://www.titannutrition.net/ref/131/
Discount code
TeamPRO
.
Видео Never ending issues with my BendPak HD-9XW four post lift. канала Rob's Garage
My lift was installed in the beginning of October, and it's now the middle of January, and I am still dealing with issues that originated from the install
As many of you know, that have watched the install video, my "qualified" technicians were not actually the most qualified.
I've gone back and forth with the local distributor, as well as going back and forth with the corporate office, both of which do not bring any resolution to the issues I'm dealing with.
Since the pneumatic lock system is not operating correctly, I have to wedge for screwdrivers into each of the four locking mechanisms, at each of the columns.
While this takes a lot of time, and is frustrating to have to do, it's also very unsafe.
By wedging the locks open, with screwdrivers, I'm removing the safety feature of the locks. If there was to be a pneumatic or cable failure, the locks would not be able to engage, thus avoiding a catastrophic failure while the car is on the lift, or while the lift is in operation.
Instagram:
https://www.instagram.com/r_wichman?r=nametag
Facebook:
https://www.facebook.com/RobertWichmanJr
To save on workout supplements.
http://www.titannutrition.net/ref/131/
Discount code
TeamPRO
.
Видео Never ending issues with my BendPak HD-9XW four post lift. канала Rob's Garage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Wintertime warmup #corvette #jeep #rx7 #garageWinter idle warmup #winter #car #idle #warmupLicense plate wall just got bigger #garage #mancave #car #plateClassic rotary exhaust #sportscar #rotary #rx7 #80s #classicIt's not always rainbows and sunshine. I need to take a look at the AC compressor on the 1980 Vette.Taking the chance to not get rained on...Mysterious case of the loose spark plugsThirsty lady #corvette #sports #carGiving the RX7 some needed love #mazda #rx7 #classic #sports #carLiving that Jeep life #jeep #jeeplife #jeeplove #twins #carfriendsThese birds have no respect #birds #corvette #respectWhen a bird decides they've had enough #corvette #birds #crashTime to replace the interior of the RX7Finally updating my clock. #clock #corvette #daylightsavings1978 Jeep CJ7 V8 at idleRoad trip report: Ford Explorer SportRoad trip report with a Jeep Gladiator #jeep #gladiator #suv #roadtripBattery Tenders for long lasting fresh batteries #car #battery #home #garageLearning my 4 post car lift needs maintenance, the hard wayChasing down Corvette leaks in my 1980 C3Changing battery in Jeep key fob