Reset Your Service Interval on 2008 08 Land Rover LR2 Indicator 09 10

This is how you reset your Service Interval on your 2008-2010 Land Rover LR2

1. Insert the key fob into the slot
2. Press and hold the TRB switch until the light comes up indicating the mileage
3. Do not put your foot on the brake, and while still holding down the TRB, press and hold the Start/Stop Button until the ignition comes up.
4. When the ignition comes up, you will see the service indicator light begin flashing. As soon as it stops flashing, release the TRB and then push it down again. You will notice that the words DIST, DATE & END will pop up and cycle through. If you do not do anything for about five seconds after releasing the TRB, the reset process will be terminated so be sure to do the next step quickly!
5. When it cycles to DIST, push down and hold the Trip Reset Button until the word RESET pops up. When this happens, release and push down once to reset.
6. When it cycles to DATE, push down and hold the Trip Reset Button until the word RESET pops up. When this happens, release and push down once to reset.
7. When it cycles to end, this indicates that the reset process is complete. You may also push the TRB but this will not cause RESET to pop up, instead it will take you back to DIST.
8. After you are finished, the indication will display DIST and Duration before the next service. And from then on the service indication that comes up momentarily at vehicle start up to remind you that a service is due won’t pop up until next due date.

Here are some of the things I use daily when working on cars:

https://amzn.to/37jyVEM --- OBD II Scanner
https://amzn.to/37jySJ6 --- Oil Life Reset Tool
https://amzn.to/3wovipJ --- Microfiber Towels
https://amzn.to/3OV8Ahh --- Heavy Duty Jumper Pack
https://amzn.to/3kIKwQE --- Pocket Sized Jumper Pack
https://amzn.to/3s9RmDa --- 12v Battery Charger

Видео Reset Your Service Interval on 2008 08 Land Rover LR2 Indicator 09 10 канала Karrs Kars