Fully 3D-printable wind-up car gift card
If you're looking for a completely new version of the gift card, you can check out my recent Davinci inspired catapult gift card here: https://youtu.be/0SO7Gl-gxPo
This wind-up car gift card is the ideal present for your friends and family. Everything on this wind-up toy car is 3D-printable, the spring, shafts, gears, wheels, everything! There are no other parts/tools necessary except for your 3D-printer and some filament (although a small hamer and a knife would be usefull but not necessary).You can make you friends happy by giving them a nice present and at the same time you can show them what is possible with 3D-printing. I created an easy instruction manual to add to the realism of building a real model kit ;-)
You can chose to print the 2 gift cards to give them to someone as a gift or to just assemble it yourself and relive some of your childhood ;-). You can also print all the parts seperatley so you don't have to remove any card material (just some supports for the turn shaft needs to be removed).
The whole car can be assembled without the need for any glue. The print time for gift card 1 (the one with the most parts) is about 4 hours. The print time for gift card 2 (the one with the wheels) is about 2 hours. I decided to print them with 100 percent infill because there wasn't that much of a difference with 25 percent infill, the print time was about the same. Another reason for 100 percent infill is that the spring is being printed better.
I tried to arrange all the parts on the card so that it is possible to print the 2 cards in 2 different colors and still look good (eg 1 wheel on one card and the 3 others on the other card).
STL and Fusion 360 source files can be found here: https://bbprojects.technology/collections/stl-fusion-360-source-files/products/fully-3d-printable-wind-up-car-gift-card-files
More info and build instructions can be found here: https://bbprojects.technology/blogs/projects/fully-3d-printable-wind-up-car-gift-card
My PayPal: https://paypal.me/BrockenBrian
Recommended tools:
3D-printer: https://www.banggood.com/Creality-3D-Ender-3-Pro-V-slot-Prusa-I3-DIY-3D-Printer-Kit-p-1346320.html?p=E01411629100201406T1&custlinkid=677427
PLA filament: https://www.banggood.com/Creality-3D-White-or-Black-or-Yellow-or-Blue-or-Red-1KG-1_75mm-PLA-Filament-For-3D-Printer-p-1290153.html?p=E01411629100201406T1&custlinkid=926158
If you're wondering how I do what I do and how you can get started creating your own prototypes I wrote a basic guide about it.
Part 1: Mechanical design can be found here: https://brian-brocken.medium.com/basic-guide-to-start-developing-your-own-products-part-1-mechanical-design-1f13d2074ebb
Part2: PCB design can be found here: https://brian-brocken.medium.com/basic-guide-to-start-developing-your-own-products-part-2-pcb-design-8295b9f8ce25
song used in the video:
Vibe With Me by Joakim Karud http://soundcloud.com/joakimkarud Music promoted by Audio Library https://youtu.be/-7YDBIGCXsY
Видео Fully 3D-printable wind-up car gift card канала Brian Brocken
This wind-up car gift card is the ideal present for your friends and family. Everything on this wind-up toy car is 3D-printable, the spring, shafts, gears, wheels, everything! There are no other parts/tools necessary except for your 3D-printer and some filament (although a small hamer and a knife would be usefull but not necessary).You can make you friends happy by giving them a nice present and at the same time you can show them what is possible with 3D-printing. I created an easy instruction manual to add to the realism of building a real model kit ;-)
You can chose to print the 2 gift cards to give them to someone as a gift or to just assemble it yourself and relive some of your childhood ;-). You can also print all the parts seperatley so you don't have to remove any card material (just some supports for the turn shaft needs to be removed).
The whole car can be assembled without the need for any glue. The print time for gift card 1 (the one with the most parts) is about 4 hours. The print time for gift card 2 (the one with the wheels) is about 2 hours. I decided to print them with 100 percent infill because there wasn't that much of a difference with 25 percent infill, the print time was about the same. Another reason for 100 percent infill is that the spring is being printed better.
I tried to arrange all the parts on the card so that it is possible to print the 2 cards in 2 different colors and still look good (eg 1 wheel on one card and the 3 others on the other card).
STL and Fusion 360 source files can be found here: https://bbprojects.technology/collections/stl-fusion-360-source-files/products/fully-3d-printable-wind-up-car-gift-card-files
More info and build instructions can be found here: https://bbprojects.technology/blogs/projects/fully-3d-printable-wind-up-car-gift-card
My PayPal: https://paypal.me/BrockenBrian
Recommended tools:
3D-printer: https://www.banggood.com/Creality-3D-Ender-3-Pro-V-slot-Prusa-I3-DIY-3D-Printer-Kit-p-1346320.html?p=E01411629100201406T1&custlinkid=677427
PLA filament: https://www.banggood.com/Creality-3D-White-or-Black-or-Yellow-or-Blue-or-Red-1KG-1_75mm-PLA-Filament-For-3D-Printer-p-1290153.html?p=E01411629100201406T1&custlinkid=926158
If you're wondering how I do what I do and how you can get started creating your own prototypes I wrote a basic guide about it.
Part 1: Mechanical design can be found here: https://brian-brocken.medium.com/basic-guide-to-start-developing-your-own-products-part-1-mechanical-design-1f13d2074ebb
Part2: PCB design can be found here: https://brian-brocken.medium.com/basic-guide-to-start-developing-your-own-products-part-2-pcb-design-8295b9f8ce25
song used in the video:
Vibe With Me by Joakim Karud http://soundcloud.com/joakimkarud Music promoted by Audio Library https://youtu.be/-7YDBIGCXsY
Видео Fully 3D-printable wind-up car gift card канала Brian Brocken
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Turning a broken 2 ton robot into a CNC-machine | ABB IRB64003D-printed high torque strain wave gearbox - harmonic driveDelta belt 3D-printer for automated series production3D-printed double helical gear pump/water pump/hydraulic pump *watertight*3D printed 1x1x1m 5 axis cnc / 3D printer part 1: XYZ axisTurning 50 cent into a Bitcoin (mini lathe + 3018 cnc)3D-printed shredder3D printed antweight battlebot: Bulldog (Flsun Q5)SpaceX inspired edf rocket part 2: Final assembly, tuning and maiden flightSpaceX inspired edf rocket part 1: deployable landing gear and thrust vector control3D printed high torque servo/gearbox version 2Universal Motion Controller - UMC: Create your own giant RC servos3D-printable Davinci catapult gift cardArduino controlled photogrammetry 3D scannerFully 3D-printable turntable3D printed RC FPV tank rover3D-printed high torque servo/gear reductionHigh voltage capacitor bank (more than 2kV and 10A)interactive youtube subscriber robotrobot hand || bionic hand prosthesis prototype