Making Lathe MILLING Attachment

Is milling on a lathe possible?
I decided to convince myself and convert my lathe into a milling machine.
Installation of the attachment does not take more than a few minutes, so quite short. I can mill keyways, make longitudinal holes, or mill small areas.
I think that for a hobbyist it can be a good solution, but if you want to mill frequently, buying a milling machine will be a better option.
The vibration turned out to be a problem in my lathe. If I had a lathe that weighed a ton or more, it wouldn't be noticeable.
In general, I think the experiment was successful and I will use this attachment from time to time.
----------------------------------------­­------------------------------------

Some tools I use in my constructions:

Self made:
Belt grinder 2x48 - https://youtu.be/2rB59KaMjaQ
Vise - https://youtu.be/7BANZRdqFvU
Drill press STAND with COOLANT SYSTEM - https://youtu.be/o68uiTp_gWk

and
Welder IDEAL Tecnomig 200GD
LATHE Cormak 330x770
Band saw Stiler BS 712R
Drill press ZX7016

----------------------------------------­­------------------------------------

Videos that you may like:
https://youtu.be/CIU5tcuduCM - KEYWAY on the LATHE
https://youtu.be/KBb81_QNVlI - Chain Saw HACK 8 - 3HP Brushcutter
https://youtu.be/f-Ebryi5m0g - Chain Saw HACK 7 - Drill Attachment
https://youtu.be/WWp32EIG2k0 - Chain Saw HACK 6 - Earth Auger
https://youtu.be/cuMJ6c5r7UQ - Wood chipper & Log splitter - BUILD
https://youtu.be/wWnsF8tsgrE - Making electric Roller Bender Part 1/3
----------------------------------------­­------------------------------------

Social media:
FB: Made in Poland
Insta: made_inpoland
----------------------------------------­­------------------------------------

Music by YouTube library :
Canada
Fleas
Just Us League
Mexico
Princess
Wonton
----------------------------------------­­------------------------------------
DIY
Homemade
How to make

Видео Making Lathe MILLING Attachment канала Made in Poland