Wanhao Duplicator i3 Mini 3D Printer Review: The Smallest Duplicator
Hi everyone! This is Top 3D Shop and in this video we will tell you about Wanhao Duplicator i3 Mini.
https://top3dshop.com/product/wanhao-duplicator-i3-mini-3d-printer
I3 mini is the most affordable model in Wanhao Duplicator FDM series. This small 3D printer doesn't look like other models in the series, whose design was borrowed from the legendary Prusa i3. i3 mini is almost half the size of other Wanhao Duplicator devices.
The printer comes fully assembled. All you need to do is unpack the machine and remove the shipping hardware.
The package contains: a Spare Print Bed Mat, filament, a glue stick, a MicroSD Card, a USB cable, a toolkit, tools for cleaning the extruder and the nozzle as well as a Getting Started Guide.
As we stated before, i3 mini is the smallest model in the Wanhao Duplicator series. The printer takes as much space as two A4 sheets of paper. As a result, the printable area is much smaller compared to the other Duplicator models. The build volume of the printer is 120х135х100 mm. At the same time, the minimum layer thickness - 100 microns - is close to that of more advanced models, i3 and i3 Plus.
According to the manufacturer, the features of this printer's design made it possible to strengthen the Z axis, which accounts for an increased stability and accuracy.
A filament spool is placed on the right side. The filament is inserted into the feeder and sent to the extruder through the bowden tube.
The front panel of the printer is placed at a convenient angle and features a memory slot as well as the control elements of the device, such as an LCD-screen, a Reset button and a knob.
The bed leveling is carried out according to the classical scheme - the height is adjusted with four screws located under the bed. Cura Wanhao Edition software is recommended for preparing digital models for printing. Experienced users can use any software they find suitable.
Prepared file with the G-code is transferred into the printer’s memory via a microSD card. The same can be done with a PC - a USB port is located on the right side panel of the machine.
The i3 Mini features the MK10 extruder, whose maximum printing speed is 70 mm/s. It’s not the highest speed out there, but considering the key parameters of the machine, it’s more than acceptable.
The bed is covered with the signature Wanhao coating. There’s no platform heating, so it is recommended to use PLA for printing. Wood is also an acceptable option, since it’s the same PLA but combined with wood dust.
Wanhao Duplicator i3 mini is a great choice for beginner-level users. This model has already been sold in a large network of Australian supermarkets. The manufacturer is not afraid of a large number of warranty claims, since in terms of its simplicity and reliability the device is as close as possible to consumer-grade machines.
Want to find out more about Wanhao Duplicator i3 mini or even buy one right now? Just head straight to top3dshop.com.
Have more questions? Please leave a comment, call us or visit our website. Our contact information is in the description below this video. We will help you choose a 3D Printer that’s best for you!
If you enjoyed this video, subscribe to our channel and hit the like button. See you soon.
Wanhao Duplicator i3 Mini
Technology: FDM
Extruder type: Single
Layer thickness: 100-400 microns
Accuracy: X/Y - 12 microns, Z - 4 microns
Build volume: 120x135x100 mm
Printing speed: 10-70 mm/s
Extruder temp: up to 260˚C
Material: PLA, ABS, PVA, Wood, etc.
Nozzle size: 1.75 mm
Connectivity: USB, Micro SD
OS: Windows, Mac OS
Dimensions: 385 x 435 x 330 mm
Weight: 7 kg
Видео Wanhao Duplicator i3 Mini 3D Printer Review: The Smallest Duplicator канала Top 3D Shop
https://top3dshop.com/product/wanhao-duplicator-i3-mini-3d-printer
I3 mini is the most affordable model in Wanhao Duplicator FDM series. This small 3D printer doesn't look like other models in the series, whose design was borrowed from the legendary Prusa i3. i3 mini is almost half the size of other Wanhao Duplicator devices.
The printer comes fully assembled. All you need to do is unpack the machine and remove the shipping hardware.
The package contains: a Spare Print Bed Mat, filament, a glue stick, a MicroSD Card, a USB cable, a toolkit, tools for cleaning the extruder and the nozzle as well as a Getting Started Guide.
As we stated before, i3 mini is the smallest model in the Wanhao Duplicator series. The printer takes as much space as two A4 sheets of paper. As a result, the printable area is much smaller compared to the other Duplicator models. The build volume of the printer is 120х135х100 mm. At the same time, the minimum layer thickness - 100 microns - is close to that of more advanced models, i3 and i3 Plus.
According to the manufacturer, the features of this printer's design made it possible to strengthen the Z axis, which accounts for an increased stability and accuracy.
A filament spool is placed on the right side. The filament is inserted into the feeder and sent to the extruder through the bowden tube.
The front panel of the printer is placed at a convenient angle and features a memory slot as well as the control elements of the device, such as an LCD-screen, a Reset button and a knob.
The bed leveling is carried out according to the classical scheme - the height is adjusted with four screws located under the bed. Cura Wanhao Edition software is recommended for preparing digital models for printing. Experienced users can use any software they find suitable.
Prepared file with the G-code is transferred into the printer’s memory via a microSD card. The same can be done with a PC - a USB port is located on the right side panel of the machine.
The i3 Mini features the MK10 extruder, whose maximum printing speed is 70 mm/s. It’s not the highest speed out there, but considering the key parameters of the machine, it’s more than acceptable.
The bed is covered with the signature Wanhao coating. There’s no platform heating, so it is recommended to use PLA for printing. Wood is also an acceptable option, since it’s the same PLA but combined with wood dust.
Wanhao Duplicator i3 mini is a great choice for beginner-level users. This model has already been sold in a large network of Australian supermarkets. The manufacturer is not afraid of a large number of warranty claims, since in terms of its simplicity and reliability the device is as close as possible to consumer-grade machines.
Want to find out more about Wanhao Duplicator i3 mini or even buy one right now? Just head straight to top3dshop.com.
Have more questions? Please leave a comment, call us or visit our website. Our contact information is in the description below this video. We will help you choose a 3D Printer that’s best for you!
If you enjoyed this video, subscribe to our channel and hit the like button. See you soon.
Wanhao Duplicator i3 Mini
Technology: FDM
Extruder type: Single
Layer thickness: 100-400 microns
Accuracy: X/Y - 12 microns, Z - 4 microns
Build volume: 120x135x100 mm
Printing speed: 10-70 mm/s
Extruder temp: up to 260˚C
Material: PLA, ABS, PVA, Wood, etc.
Nozzle size: 1.75 mm
Connectivity: USB, Micro SD
OS: Windows, Mac OS
Dimensions: 385 x 435 x 330 mm
Weight: 7 kg
Видео Wanhao Duplicator i3 Mini 3D Printer Review: The Smallest Duplicator канала Top 3D Shop
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Monoprice MP i3 Mini 3D Printer - Update & Prints](https://i.ytimg.com/vi/Uep7rUd9YB8/default.jpg)
![Wanhao i3 Mini 1st impressions.](https://i.ytimg.com/vi/Vo0WxLlx8zQ/default.jpg)
![IMPRESORA 3D WANHAO DUPLICATOR I3 MINI | PARTE 1](https://i.ytimg.com/vi/8HUtjcUPqm4/default.jpg)
![Monoprice MP i3 3D Printer - Unbox & Setup](https://i.ytimg.com/vi/cMNPOgRJxV4/default.jpg)
![Wanhao Duplicator I3 mini uitleg](https://i.ytimg.com/vi/YSR0iPhKb_s/default.jpg)
![Anisoprint Composer A4 Continuous Carbon Fiber 3D Printing: Create Parts As Strong As Metal](https://i.ytimg.com/vi/iDzFBmFkwZY/default.jpg)
![Raise 3D Printers Using PVA Filament](https://i.ytimg.com/vi/J4AYE7a4vd0/default.jpg)
![Wanhao Duplicator i3 Mini : Unboxing, Review & Prints Showcase](https://i.ytimg.com/vi/VoypWr-xUkY/default.jpg)
![Der Cube 2... Klein und handlich, aber auch fähig? Ich teste ihn.](https://i.ytimg.com/vi/vkFxXQnBlX8/default.jpg)
![$140 3D Printer Power Spec Duplicator i3 Mini V2 -Is it worth it in 2020?](https://i.ytimg.com/vi/eKywacpOpB0/default.jpg)
![We fix the Wanhao Duplicator D9 for perfect prints.](https://i.ytimg.com/vi/NrLEy847fUY/default.jpg)
![3D принтер своими руками. Механика](https://i.ytimg.com/vi/0F0VIj0JOJo/default.jpg)
![Best Budget Large-Format 3D printers: Modix3D Big-60, Big-120, Big-180](https://i.ytimg.com/vi/cbYpQBBKe4Q/default.jpg)
![How to 3D Print with Raise3D ideaMaker](https://i.ytimg.com/vi/kpZKG_9q4Lw/default.jpg)
![Wanhao Duplicator İ3 Mini Kutu Açılışı](https://i.ytimg.com/vi/QFuP4L1dId4/default.jpg)
![A Wanhao Duplicator i3 bemutatása.](https://i.ytimg.com/vi/gv1lIe-Gopw/default.jpg)
![Duplicator 7 Plus](https://i.ytimg.com/vi/Oge2mN43s-Q/default.jpg)
![Anycubic 4MAX Pro 2.0 - alternative display firmware](https://i.ytimg.com/vi/0oBGMIzqL08/default.jpg)
![The Anet A8 PLUS is big, cheap and won't catch fire. 3D Printer Review](https://i.ytimg.com/vi/3qlpdI1kTV4/default.jpg)
![SLS 3d Printer Sinterit Lisa Pro Unboxing](https://i.ytimg.com/vi/Sht4XL1rjmE/default.jpg)