G&E Shaper New Oil and Run In

I discuss the oil recommended to run in these machines from G&E, and how to figure out the proper viscosity depending on the SUS specs given.
For my shaper I went with Multi-Purpose Machine Oil 100 purchased from McMaster-Carr. This oil has the proper SUS and viscosity required to allow proper lubrication of the sliding ways and gearing.
So we top off the crankcase and get the shaper fired back up! I'll give you the first looks at the crank and gearing inside during operation. I also do some adjusting on the sight oilers for the ram ways.

Want tot help support this channel? https://www.patreon.com/abom79

Видео G&E Shaper New Oil and Run In канала Abom79