How to Install Outside Mount Zebra Dual Shades

Most people think installing their own blinds is hard. Following the simple, step-by-step instructions in this video though makes hanging your custom zebra shades easy to do yourself! Today we’ll show you how to put up a zebra with an attached cassette headrail. Just screw in your brackets, snap on the headrail and you’re done!

Here’s how you do it:

1. Measure in and mark 2” - 4” from the top-left corner, and again from the top right corner.

2. From these marks, measure up at least 1” and place another set of marks above the first ones.

3. Using one bracket as a template, place it just over each of the marks from step 2, and then mark 2 screw locations through the back of the bracket.

4. Predrill each of your screw holes.

5. Drill the screws into each bracket loosely, allowing you to make any small adjustments. When everything is straight, finish drilling in the screws all the way.

6. With the front of the shade facing you, rest the top of the cassette on the top lip of the brackets.

7. Push the bottom front of the headrail firmly back toward the window until it catches on the back of the brackets and snap it into place. You’ll hear a loud click when it is.

8.Remove the protective bands, and center the bottom rail on the fabric. Then, test the operation of the shade.

9. Congratulations! You just installed your own zebra shade! Wasn’t that easy?

If you have any questions or need any help with installing your zebra or any of our other shades or blinds, see your product’s installation guide on our website or just give your Customer Care team at call at 888-257-1840. We’re here to help!

Видео How to Install Outside Mount Zebra Dual Shades канала SelectBlinds