How to Install Inside Mount Zebra Dual Shades

Most people think installing their own blinds is hard. Following the simple, step-by-step instructions in this video though makes hanging your custom zebra shades easy to do yourself! Today we’ll show you how to put up a zebra with an attached cassette headrail. Just screw in your brackets, snap on the headrail and you’re done!

Here’s how you do it:

1. Depending on the width of your shade, you may need more than two brackets, which can be centered between your outermost brackets. Once you've decided where each bracket will be placed, mark those areas with a pencil.

2. Use the holes in the top of each bracket to mark where the screws will go.

3. Make sure your marks are aligned before you screw the brackets into place. We also recommend pre-drilling pilot holes once everything’s aligned. This makes it easier to drill your screws in.

4. One at a time, place each bracket over the marks or holes you’ve made and drill the screws in loosely. This gives you a little wiggle room for any adjustments to make sure the brackets are straight and aligned.

5. Finish drilling in the screws all the way.

6. With the front of the shade facing you, rest the top of the cassette on the top lip of the brackets.

7. Push the bottom front of the headrail firmly back toward the window until it catches on the back of the brackets and snap it into place. You’ll hear a loud click when it is.

8. Congratulations! You just installed your own zebra shade! Wasn’t that easy?

If you have any questions or need any help with installing your zebra or any of our other shades or blinds, see your product’s installation guide on our website or just give your Customer Care team at call at 888-257-1840. We’re here to help!

Видео How to Install Inside Mount Zebra Dual Shades канала SelectBlinds