1 Cube? Must Have More Corners!!!! 🤯

One cube becomes a vase with 6 wings and 3 feet!

Thank you all so much for watching! Yes, another month rolls by and my hopes for a quicker project turnout were dashed... but that's my life right now. On the bright side, I got a new camera after the old one stopped focusing on objects more than 5 feet away. Let me know if you like the new picture!

This is my 29th filmed project. I had been wanting to try another cube theory project, but the amount of wasted wood from the typical cube turning drives me nuts. So, I chose to waste resin instead... literally. It started with a horrible miscalculation, in which I mixed exactly twice as much resin as I needed, and when I realized I had a bucket of resin left over and a ticking clock, it was too late to do anything about it. In fact, I tried mixing in more pigment and before I knew it the mixer pulled out a glob of curing resin. Check out my Instagram (@adamsen_woodcraft) for the pic. Anyway, the project went fairly easily until I decided to use lacquer as the final finish. Well, it's getting too cold in Maine for lacquer to cure properly, and it got somewhat cloudy. I don't think the final finish is horrible, but it isn't ideal. I simply ran out of the time and patience required to fix it.

Again, thank you all for watching. I appreciate your comments, even though I can't respond to all of them. You are the best audience anyone could wish for!

THANKS to Starbond you can now get 15% off all Starbond products with the promo code ADAMSEN15: https://www.starbond.com/?rfsn=3474671.1b0143

Cheers to all! Let me know your thoughts by commenting below!

If you're new to the channel, please consider subscribing! Also, please like the video and comment, letting me know how I'm doing and what you'd like me to make next. Getting your feedback really helps to promote my videos and channel, and I always love reading and responding!

Frogblanks.com has generously provided a 15% discount (not combinable with other offers) if you use code "YT-DAVID". Use that code and it will help me out too!

If you're interested in my other projects, check out my Etsy shop:
https://www.etsy.com/shop/AdamsenWoodcraft

All of the music used in this video came from:
https://www.epidemicsound.com/referral/45i3ed/

If you'd like to exchange stickers or send me something, feel free to email me at adamsen.david@gmail.com or use the address below:

David Adamsen
2512 Atlantic HWY, #322
Lincolnville, Maine 04849-9998
USA

Thanks again! Cheers!

Products I use:
My new buffing system: https://amzn.to/2BC90YG
3 inch Sanding Disks: https://amzn.to/2Zc6ccY
My new right angle drill/sander: https://amzn.to/2A54CkB
My favorite finish (Mahoney's Walnut products): https://amzn.to/31uM88z
Pyrography Pen: https://amzn.to/2G5HJwU
Carter & Son 5/8" Bowl Gouge: https://amzn.to/2G5YV5g
Crown Diamond Parting Tool: https://amzn.to/2NIqsOj
Tormek T-8 Sharpener with Woodturners Accessories: https://amzn.to/30D2iKA
Five minute epoxy: https://amzn.to/2udSavt
My NEW Camera: https://amzn.to/34Ef0Mo

Видео 1 Cube? Must Have More Corners!!!! 🤯 канала David Adamsen