Making A Tube Notcher (For The Electric Crosskart Build)
I built this tube notcher on the fly the other day with parts that I had on hand to help with the crosskart chassis build. It's not perfect but it was easy to put together, is rugged and can notch tubes ranging from 3/4" to 2" (19-50mm) in diameter at any angle.
Get the plans here: https://www.resystech.com/pipe--tube-notcher-plans.html
Parts & materials
Steel can be found here: https://www.metalsdepot.com/category/steel-products
2x2” (50x50mm), ¼” (6mm) thick steel angle, 8” (20cm) long
2.5x2.5” (63.5x63.5mm) 3/16’ (5mm) thick wall square tubing, 6” (152mm) long
1x1/4” (25x6mm) steel flat bar, 6” (152mm) long
1x1” (25x25mm), 3/16” (5mm) thick steel angle, 6” (152mm) long
2”x1/4” (50x6mm) steel flat bar, 18” (46cm) long
1 ¾” (44.5mm) OD DOM tubing, 1 ¼” (32mm) ID, 6” long
¾” (19mm) steel round bar, 6” (152mm) long
½” (12.5mm) threaded rod w/ lock nut and washer
5/16x1” (8x25mm) socket cap screw
¾” (19mm) ID linear bearing
https://www.bearingscanada.com/LBB12UU-3-4-inch-Linear-Motion-with-Seals-Bushing-p/LBB12UU-LINEAR.htm?g
clid=CjwKCAjw9MuCBhBUEiwAbDZ-7ijTfqE5IUUP2bo-LMWa7ZpHWAWkuTSEbT1mf-rTQU-0BiCcV0_vjhoCr6kQAv
D_BwE
Carbide tipped hole saw kit
https://www.canadiantire.ca/en/pdp/maximum-carbide-tipped-hole-saw-set-10-pc-0540314p.0540314.html?
Don't like ads? Neither do I. I hate them. That's why I signed up for a premium Youtube account for $12/month so that I never have to see another ad on this site again, and feel good knowing that I'm contributing to the creators I like so that they keep posting more great content. I highly recommend it. If you're just here to watch my videos, that's cool too. You can help support me specifically by signing up for a channel membership instead. Then just keep an eye on the community tab to watch these videos free of advertisements. You'll also get other perks, too. Check out the links below if you're interested.
Youtube premium account:
https://www.youtube.com/premium?ybp=Sg0IBhIJdW5saW1pdGVk
Support RST specifically:
http://www.patreon.com/resystech
https://www.youtube.com/channel/UCtrf6ZiE6hw3k77hGpnuQWg/join
Follow RST on Facebook:
https://www.facebook.com/RenewableSystemsTechnology
Видео Making A Tube Notcher (For The Electric Crosskart Build) канала James Biggar
Get the plans here: https://www.resystech.com/pipe--tube-notcher-plans.html
Parts & materials
Steel can be found here: https://www.metalsdepot.com/category/steel-products
2x2” (50x50mm), ¼” (6mm) thick steel angle, 8” (20cm) long
2.5x2.5” (63.5x63.5mm) 3/16’ (5mm) thick wall square tubing, 6” (152mm) long
1x1/4” (25x6mm) steel flat bar, 6” (152mm) long
1x1” (25x25mm), 3/16” (5mm) thick steel angle, 6” (152mm) long
2”x1/4” (50x6mm) steel flat bar, 18” (46cm) long
1 ¾” (44.5mm) OD DOM tubing, 1 ¼” (32mm) ID, 6” long
¾” (19mm) steel round bar, 6” (152mm) long
½” (12.5mm) threaded rod w/ lock nut and washer
5/16x1” (8x25mm) socket cap screw
¾” (19mm) ID linear bearing
https://www.bearingscanada.com/LBB12UU-3-4-inch-Linear-Motion-with-Seals-Bushing-p/LBB12UU-LINEAR.htm?g
clid=CjwKCAjw9MuCBhBUEiwAbDZ-7ijTfqE5IUUP2bo-LMWa7ZpHWAWkuTSEbT1mf-rTQU-0BiCcV0_vjhoCr6kQAv
D_BwE
Carbide tipped hole saw kit
https://www.canadiantire.ca/en/pdp/maximum-carbide-tipped-hole-saw-set-10-pc-0540314p.0540314.html?
Don't like ads? Neither do I. I hate them. That's why I signed up for a premium Youtube account for $12/month so that I never have to see another ad on this site again, and feel good knowing that I'm contributing to the creators I like so that they keep posting more great content. I highly recommend it. If you're just here to watch my videos, that's cool too. You can help support me specifically by signing up for a channel membership instead. Then just keep an eye on the community tab to watch these videos free of advertisements. You'll also get other perks, too. Check out the links below if you're interested.
Youtube premium account:
https://www.youtube.com/premium?ybp=Sg0IBhIJdW5saW1pdGVk
Support RST specifically:
http://www.patreon.com/resystech
https://www.youtube.com/channel/UCtrf6ZiE6hw3k77hGpnuQWg/join
Follow RST on Facebook:
https://www.facebook.com/RenewableSystemsTechnology
Видео Making A Tube Notcher (For The Electric Crosskart Build) канала James Biggar
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Building An Electric Crosskart Part 1: The ChassisWelding Giant Polyhedral DiceMake A Pipe Notcher | Simple Homemade Tube Notcher | DIYMaking of futuristic motorcycle - I Modified Scooter to the two-wheeled vehicleTurbo Crosskart 1300cc over 300hpBuilding A Mini Porch Lift (For My Grandparents) - Plans Available☀️ Build A Solar Heat Pump System16.000rpm Kart Cross going CRAZY on Track! - Buggies with 600cc MotorBike Engine!🛠 Building The Modular Articulated Tool Guide System - Gen IIKart-Cross SPEEDCAR XTREM fourth chapter chassis manufacturing/4ºcapítuloMaking a BIG pipe bender from scrap, using basic toolsNotch Tubing at an Angle without a Tubing Notcher: 3D Printed Tube Coping ToolBuilding An Electric Streetfighter Motorcycle - Complete Build & Test Ride!Building The 3 kW Reaper Off Grid Wind Turbine - Complete BuildHomemade Metal Band SawSHOP BUILD - 20 tons hydraulic PressHow To Notch Tubing to Build a Roll Cage, Exhaust, Go Cart Chassis - Eastwood Tubing NotcherHomemade 600CC KAWASAKI BUGGY ULTIMATE TEST DRIVE!Kart-Cross SPEEDCAR XTREM first chapter chassis manufacturing/1er capituloR1 buggy edge barracuda rebuild nearly finished (**UPLOAD ONCE FINISHED**)