TOMAS - Cut and cover tunnel technology
The TOMAS Surface Tunneling technology is based on three innovations:
1. Building a semi circular tunnel from the surface in soils with high water table without draining or pumping out the sub-surface water.
2. Removing the soil mixed with water within a half round shield with standard cutter dredging technology adapted for this application.
3. Using standard segmented tunneling sections to shape the tunnel, but fixing these segments with post-tensioning under a continuous precast or cast on site concrete beam fixed and supported or held by rakes of piles.
Benefits of this technology are:
- Short construction time because of fast building (50-80 mtrs/day)
- Low investment cost
- Limited construction space required
- No ground dewatering required
- Soil removal by dredging is the cheapest way of moving soil
- Material transport can be done through finished tunnel
- Minimum impact on the environment
- Use is made of well-known technologies
- Innovative construction method with international potential
Current contact for technology licensing:
Ing. Jaap H. Ketel,
NEDLAND BV
3831 PB LEUSDEN
The Netherlands
Tel. +31.33.43 43 500
Fax. +31.33.43 43 501
Mob. +31.6.532 61 771
Видео TOMAS - Cut and cover tunnel technology канала Jaap Ketel
1. Building a semi circular tunnel from the surface in soils with high water table without draining or pumping out the sub-surface water.
2. Removing the soil mixed with water within a half round shield with standard cutter dredging technology adapted for this application.
3. Using standard segmented tunneling sections to shape the tunnel, but fixing these segments with post-tensioning under a continuous precast or cast on site concrete beam fixed and supported or held by rakes of piles.
Benefits of this technology are:
- Short construction time because of fast building (50-80 mtrs/day)
- Low investment cost
- Limited construction space required
- No ground dewatering required
- Soil removal by dredging is the cheapest way of moving soil
- Material transport can be done through finished tunnel
- Minimum impact on the environment
- Use is made of well-known technologies
- Innovative construction method with international potential
Current contact for technology licensing:
Ing. Jaap H. Ketel,
NEDLAND BV
3831 PB LEUSDEN
The Netherlands
Tel. +31.33.43 43 500
Fax. +31.33.43 43 501
Mob. +31.6.532 61 771
Видео TOMAS - Cut and cover tunnel technology канала Jaap Ketel
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Meet Crossrail's giant tunnelling machinesCut And Cover Tunnel Construction SimulationTunnel boring machines. They pierce the mountain like this.Cut & CoverPetrucco 2017 Box Jacking - Doha, QatarThe Construction of Sydney Harbour BridgeLarge Diameter EPB ShieldPingnan 3rd Bridge Animation平南三桥施工动画Driving from Queens to Manhattan via Queensboro Bridge Upper Level 2019 Aug. 28 Unedited Real SoundsMighty Machines - Season 01 Episode 09 - On the construction siteMEGA TUNNEL MACHINES - Drilling, Digging & Blasting | Full DocumentaryVirtual Simulation for Top Down Construction MethodBuilding an addition: Part 2 (forming and pouring foundation walls, damp proofing)AVN 600Túneles: Método Austriaco.Fixing A Bad Drainage ProblemHow India is building the most difficult network of Tunnels in Kashmir Mountains?Cab Ride TARQUINIA-MACCARESE "theitaliantraindrivers"River Chess Dredging 22.01.15Dirty Great Machines - Bucket Wheel Excavator | Technology Documentary | Reel Truth. Science