MPCNC Primo Build Ep. 09 Installing trucks and Belts

Here we assemble our MPCNC on the table. Put the belts on, with some difficulty. Install the core and square it up. I did not go into all the details on squaring it up, its just a lot of back and forth with a tape measure. I only got mine within a couple millimeters for now since I am unsure if my plasma setup will work, or if I will be tearing it all apart and redoing it as a router.

V1 Engineering Squaring things up
https://docs.v1engineering.com/mpcnc/tops/
https://docs.v1engineering.com/mpcnc/squaring/

Credit goes to V1 Engineering for doing all the work. They sell all the parts to complete this build, you can just assemble one if you please.
https://www.v1engineering.com/​​

I don't go into all the details. Step by step instructions start here thanks to V1 Engineering. https://docs.v1engineering.com/mpcnc/​​...

Printed on a Creality Ender 3 0.4 nozzle, 60 mms, 0.28 layer height, gst3d and sunlu filament.
Files downloaded at https://www.thingiverse.com/thing:458​​...
Sliced with Cura 4.8
3/4 EMT galvanized tubing for all the legs and later rails.

I reprinted the belt tensioners with 0.16 layer height, 50mms, 45% infill and 6 walls.

Видео MPCNC Primo Build Ep. 09 Installing trucks and Belts канала Eli Works