MPCNC Primo Build Ep. 11 First Drawings
Now that I have the the MPCNC Primo assembled (mostly), it is time to do some test drawings. The speeds and feeds are set for plasma cutting so its slow going, but it shows that my Fusion360 post processor works. Please like and subscribe if you enjoy my videos.
Credit goes to V1 Engineering for doing all the work. They sell all the parts to complete this build, you can just assemble one if you please.
https://www.v1engineering.com/
I don't go into all the details. Step by step instructions start here thanks to V1 Engineering. https://docs.v1engineering.com/mpcnc/...
Printed on a Creality Ender 3 0.4 nozzle, 60 mms, 0.28 layer height, gst3d and sunlu filament.
Files downloaded at https://www.thingiverse.com/thing:458...
Sliced with Cura 4.8
3/4 EMT galvanized tubing for all the legs and later rails.
I reprinted the belt tensioners with 0.16 layer height, 50mms, 45% infill and 6 walls.
Heavy Action by Audionautix is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/by/4.0/
Artist: http://audionautix.com/
Видео MPCNC Primo Build Ep. 11 First Drawings канала Eli Works
Credit goes to V1 Engineering for doing all the work. They sell all the parts to complete this build, you can just assemble one if you please.
https://www.v1engineering.com/
I don't go into all the details. Step by step instructions start here thanks to V1 Engineering. https://docs.v1engineering.com/mpcnc/...
Printed on a Creality Ender 3 0.4 nozzle, 60 mms, 0.28 layer height, gst3d and sunlu filament.
Files downloaded at https://www.thingiverse.com/thing:458...
Sliced with Cura 4.8
3/4 EMT galvanized tubing for all the legs and later rails.
I reprinted the belt tensioners with 0.16 layer height, 50mms, 45% infill and 6 walls.
Heavy Action by Audionautix is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/by/4.0/
Artist: http://audionautix.com/
Видео MPCNC Primo Build Ep. 11 First Drawings канала Eli Works
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
MPCNC Primo Build Ep. 04 EMT Tube mock upDads harley idle #shortsUrban cross startMPCNC Lube #shortsPump gas 540 idleSandblast Hood Fresh Air Supply DIYTwo Ls1 Camaro's81 vs 99 Camaro.3d print time lapse mpcnc primo feetNitrous ChevelleTaking the 55 stroller for a cruisePump Gas 540 Camaro Start and Back in Garage.MPCNC Primo Build Ep. 21 Cut50L Plasma Cutter.99 CamaroLithophane 3D Time-lapse MoonLs1 powered z2855 Chevy stroller steeringCedarloo Neighborhood, Cedar Falls, IA 1930 to present.Rear facing car seat in a CamaroMPCNC Primo Build Ep. 15 First Plasma cutsEli Works Logo 3d Print time lapse